Denon AVR-484 User Manual download pdf (Page 31)

ENGLISH

SURROUND

Before playing with the surround function

• Before playing with the surround function, be sure to use the test tones to adjust the playback level from each speakers. This adjustment can

be performed from the remote control unit, as (described) below.

• The adjustment with the test tones is only effective in the DOLBY/DTS SURROUND modes.

The adjusted playback levels for the different surround modes are automatically stored in the memory of each surround modes.

Set the DOLBY/DTS SURROUND (Dolby Pro Logic II or Dolby

Digital or DTS) modes.

Press the TEST TONE button.

After completing the adjustment, press the TEST TONE

button again.

(Main unit) (Remote control unit)

(Remote control unit)

Test tones are output from the

different speakers. Use the channel

volume adjust buttons to adjust so

that the volume of the test tones is

the same for all the speakers.

(Remote control unit)

2, 3

(Remote control unit)

NOTE: Please make sure the “AUDIO” position of the slide

switch on the remote control unit.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 103 104

No comments

Denon AVR-484 User Manual Page 31