Denon AVR 790 User Manual download pdf (Page 2)

17590509 A

Denon Brand Company

D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,

Kanagawa, 210-8569, Japan

www.denon.com

Denon Electronics (USA), LLC.

100 Corporate Drive, Mahwah, New Jersey 07430 USA

TEL: 201-762-6500

usa.denon.com

Denon Canada Inc.

505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1

TEL: 905-475-4085

ca.denon.com

*Design and speci cations are subject to change without notice.

*“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

*DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and

DTS-HD Master Audio are trademarks of DTS, Inc.

*HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

*Audyssey MultEQ

is a registered trademark of Audyssey Laboratories.

Audyssey Dynamic EQ™ is a trademark of Audyssey Laboratories.

Audyssey Dynamic Volume™ is a trademark of Audyssey Laboratories.

*iPod

is a trademark of Apple Inc., registered in the U.S. and other countries.

Main Speci cations

Power ampli er section Preampli er section

Rated output

*THD  gures are power amp stage values. Input sensitivity/impedance

200 mV / 47 k/kohms

Front L/R 90 W + 90 W Frequency response

10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)

(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) S/N Ratio 100 dB

(IHF-A weighted, DIRECT mode)

125 W + 125 W

(6 ohms, 1 kHz, THD 0.7%) FM section

Center 90 W Tuning frequency range 87.5 - 107.9 MHz

(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) Usable sensitivity 1.0 µV (11.2 dBf)

125 W

(6 ohms, 1 kHz, THD 0.7%) AM section

Surround L/R 90 W + 90 W Tuning frequency range 520 - 1710 kHz

(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) Usable sensitivity 18 µV

125 W + 125 W

(6 ohms, 1 kHz, THD 0.7%) General

Surround Back L/R 90 W + 90 W Power supply AC 120 V, 60 Hz

(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) Power consumption 5.5 A (Standby 0.3 W)

125 W + 125 W Dimensions (W x H x D) 434 x 171 x 377 mm

(6 ohms, 1 kHz, THD 0.7%) 17-3/32” x 6-47/64” x 14-27/32”

Weight 10.7 kg

23 lbs 9.5 oz

Ports

In HDMI x 4

Component x 2

S-Video x 1

Composite (Video) x 4

Analog Audio (Tuner included) x 7

Analog EXT. Input 7.1ch

Digital Optical x 2

Digital Coaxial x 2

Out HDMI Monitor x 1

Component Monitor x 1

Composite Monitor (Monitor / DVR) x 2

Analog Audio REC x 2

Analog Audio (Zone2) x 1

Audio Preout (SW) x 1

Digital Optical x 1

Phones x 1

Other Microphone Port x 1

Dock Control Port x 1

FM Tuner Antenna x 1

AM Tuner Antenna x 1

Sirius Connector x 1

State-of-the-art Denon Solutions for

Maximizing Content Quality

•

Robust power source for each block, for stable supply of current

To produce a clear, stable power circuit that prevents unwanted

noise from affecting the sound, the AVR-790 has a dedicated

CPU transformer that is separate from the audio and video

circuitry. The AVR-790 is equipped with a powerful rectifier

circuit with 12,000 F block capacitors and a bridge diode of 8A

capacity, surpassing typical models in this price range, to supply

stable current with negligible noise.

• High-bit I/P Converter and Scaler up to 1080p

The AVR-790 uses a high-performance video up-scaler to convert

SD (standard definition) video material to HD (high definition)

quality. This means that the 480i/480p (SD-quality) video signals

of DVD programs and other material are converted to the high-

quality 1080p signal of HD video, and output to the HDMI port.

The fuzziness in the details of SD video is removed to produce

a clear picture. Now you can enjoy not only your DVDs but also

your VCR tapes and games with much greater clarity and detail.

• Analog to HDMI up-conversion, I/P converter

and scaler on HDMI to HDMI

Analog video input signals (composite, S-video, component) are

converted to digital video signals and transmitted to the HDMI

output port. Digital video signals are sent to the HDMI output

even when multiple HDMI devices such as a video camera or a

game console are connected to the AVR-790. One HDMI cable is all

that’s needed to connect the AVR-790 to a TV (monitor).

• Dolby Pro Logic IIz processing

Dolby Pro Logic IIz introduces a new dimension to home theater

entertainment through the addition of a pair of front height

channels. Compatible with stereo, 5.1 and 7.1 content, Dolby

Pro Logic IIz provides enhanced spaciousness, depth and

dimension to movies, concert video and video game playback

while maintaining the full integrity of the source mix.

•

Minimum Signal Path for clear audio and video signal

The “simple and straight” design concept has been thoroughly

implemented in the signal paths to contribute to immaculately

clean audio and video playback.

Signal paths are as short as

possible to keep signal degradation in the audio and video

circuitry to an absolute minimum.

•

Direct Mechanical Ground Construction, embodying

concepts for thorough vibration resistance

Vibration-resistant construction has been reviewed to thoroughly

suppress the adverse influences of vibration on sound quality.

The power transformers, a source of vibration, have been

securely mounted on the highly rigid bottom chassis. Direct

mounting of cast-iron feet to the radiator in near proximity to

each other serves to suppress mutual vibration with the power

transformers and other sources of vibration.

• Digital / analog separate windings

• Compressed Audio Restorer to enhance

digital music  les

Connectivity & Future-ready Expandability

• Power Amp Assign function, for versatility in

using the AVR-790 for di erent purposes

The AVR-790 supports up to 7.1 channels (FL/ FR/ C/ SL/

SR/ SBL/ SBR/ SW) for surround playback defined by the

Blu-ray disc format. To enjoy surround playback with the

AVR-790’s Dolby Pro Logic IIz, you can reassign the power

amp from the two surround back channels (SBL/SBR) to the

two front high channels (FLH/FRH). Or by assigning the SBL/

SBR power amp to Zone 2, you can enjoy multi-room audio

playback, or to achieve higher-quality sound for 2-channel ste-

reo playback, you can configure the AVR-790 for front bi-amp

operation. These are just some of the ways you can arrange

the AVR-790’s amps to suit various listening styles.

• Audio/video playback and control for iPod with

optional dock (ASD-11R)

Ease-of-use

• Audyssey Dynamic Volume,

for real-time volume adjustment

Audyssey Dynamic Volume constantly monitors the sound

sources and adjusts the volume to the optimum level for the

particular source being heard without sacrificing dynamic

range. The AVR-790 is also equipped with Audyssey MultEQ

which measures the acoustic characteristics of the room to

obtain the optimum acoustic effects, and Dynamic EQ which

reproduces the high and low range with the optimum acoustic

effect during low volume levels. Dynamic Volume combines

these two functions to achieve maximum performance.

• MultEQ Auto setup and Room EQ room acoustic

correction

-Tower type microphone for more accurate measuring

-Up to six measurement points

High level resolution  lters for satellite speakers and also subwoofer

• Auto surround mode

• Audio Delay function

(max. 6 frames or 200 mSec)

• Muting level settings (Full/-40dB/-20dB)

• Audio level memory, capable of correcting

di erent signal levels for each input device

• Variable subwoofer crossover switching

1 2

Comments to this Manuals

No comments

Denon AVR 790 User Manual Page 2

Comments to this Manuals

Related products and manuals for Acoustics Denon AVR 790