Denon AVR 1906 - AV Receiver Operations Instructions download pdf (Page 20)

Basic Operation Basic Operation

Connect the headphones to the PHONES jack.

•The pre-out output (including the speaker output) is

automatically turned off when headphones are connected.

NOTE:

•To prevent hearing loss, do not raise the volume level

excessively when using headphones.

Listening over headphones

2 On-screen display

Press the VIDEO SELECT button repeatedly until the

desired source appears on the display.

Combining the currently playing sound with

the desired image (VIDEO SELECT)

Use this switch to monitor a video source other than the

audio source.

IN=V SOURCE

Checking the currently playing program

source

Press the ON SCREEN button.

Each time an operation is performed, a description of that

operation appears on the display connected to the unit’s

VIDEO MONITOR OUT terminal. Also, the unit’s operating

status can be checked during playback.

Such information as the position of the input selector and

the surround parameter settings is output in sequence.

• Canceling simulcast playback:

q Select “SOURCE” by pressing the VIDEO SELECT button.

w Switch the program source to the component connected to

the video input terminals.

Press the SPEAKER A or B button to turn the

corresponding speaker pair on.

Selecting the front speakers

The front speaker A, B setting can be also be changed with

the SPEAKER button on the remote control unit.

2 Using the dimmer function

Press the DIMMER button.

The display brightness changes in four steps (bright,

medium, dim and off).

AUTO (auto mode):

In this mode, the types of signals being input to the digital and

analog input terminals for the selected input source are

detected and the program in the AVR-1906’s surround

decoder is selected automatically upon playback. This mode

can be selected for all input sources other than TUNER.

The presence or absence of digital signals is detected, the

signals input to the digital input terminals are identified and

decoding and playback are performed automatically with the

DTS, Dolby Digital or PCM (2 channel stereo) format. If no

digital signal is being input, the analog input terminals are

selected.

Use this mode to play Dolby Digital signals.

DTS (exclusive DTS signal playback mode):

Decoding and playback are only performed when DTS signals

are being input.

PCM (exclusive PCM signal playback mode):

Decoding and playback are only performed when PCM signals

are being input.

Note that noise may be generated when using this mode to

play signals other than PCM signals.

ENGLISH

Input mode

The AVR-1906 has an AUTO signal detection mode that

automatically identifies the type of incoming audio signals, but is

also equipped with a manual mode that can be switched

according to the type of input audio signals.

2 Selecting the AUTO, PCM and DTS modes

AUTO PCM DTS

Press the INPUT MODE button.

The mode switches as shown below each time the INPUT

MODE button is pressed:

PHONES

DIRECT/STEREO

SPEAKER

ANALOG

INPUT MODE

STEREO

DIRECT

SPEAKER

DIMMER

ANALOG

INPUT MODE

VIDEO SELECT

ON SCREEN

ENGLISH

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 109 110

Comments to this Manuals

No comments

Denon AVR 1906 - AV Receiver Operations Instructions Page 20

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR 1906 - AV Receiver