Denon DN-HC4500 - DJ Mixer USB Controller User Manual download pdf (Page 28)

the frequency modulation/gain/width depending on the Filter

selected.

Plug-ins Module: Supports up to two VST plug-ins. You

must have purchased or already own plug-ins which are

sold separately. Simply Select the VST plug-in from the

drop down menu and the chosen effect will be applied. To

adjust the parameters of the plug-in, click the edit button.

Bypass button will override or turn off the effect.

VU Module: Displays the track’s signal level in volume

units. Green is good, Yellow is ok, constant Red means

track’s signal is too hot/clipping/distorting.

About The Mixer Module and How to Control

The PCDJ Reflex LE Software mixer module contains a

cross fader with player select buttons and volume controls for

each player.

Player Volume Sliders: Contains 3 volume controls from left

to right Player, A, B, and C. You can set the HC-4500 into Mixer

mode by holding down the “FLIP” button and pressing “TITLE”

button on the controller. Then use the Pitch Control Slider to

Adjust Volume Level up or down. When in Mixer Mode the

“PARAMETERS” Knob is used to control Pitch. Repeat this step

for each side of the controller and/or to switch out of mixer

mode.

NOTE

You can not use Mixer Mode on the controller for Player C.

Cross Fade: This slide cross fades between Player “A” and “B”

and “C” and works in conjunction with the separate volume

sliders. To move the slide, hold the mouse button down on top

of it and move the mouse pointer horizontally left or right. The

slide will move with the pointer. You can also click where you

want the slide to be in the slide’s track area, and it will instantly

move to that position.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33

No comments

Denon DN-HC4500 - DJ Mixer USB Controller User Manual Page 28