Denon AVR-1513 Owner's Manual download pdf (Page 8)

ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS ESPAÑOL NEDERLANDS SVENSKA

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA

Use ui to select a speaker, and use

o p to select distance.

Front L / Front R / Center / Subwoofer /

Surround L / Surround R

Select the speaker.

• 0.0ft – 60.0ft : Set the distance.

• The speakers that can be selected differ

depending on the “Speaker Conﬁ g.”

(vpage5) settings.

• Default settings :

Front L / Front R / Center / Subwoofer : 12.0 ft

Surround L / Surround R : 10.0 ft

• Set the difference in the distance between the

speakers to less than 20 ft.

NOTE

Speakers set to “None” in “Speaker Conﬁ g.”

(vpage5) are not displayed.

Press ENTER to enter the setting.

Speaker Config.

Bass Setting

Distance

Channel Level

Crossover Freq.

Step

Front L/R

Center

Subwoofer

Surround L/R

Speaker Setup

Use ui to select “Channel Level”,

and then press ENTER.

Speaker Config.

Bass Setting

Distance

Channel Level

Crossover Freq.

Test Tone Start

Default

Speaker Setup

Enter ReturnENTER

BACK

Test Tone Start

Default

Channel Level

Press ENTER.

Output test tone.

0.0dB

Front L

Center

Front R

Surround R

Surround L

Subwoofer

Channel Level

Enter ReturnENTER

BACK

Use ui to select a speaker, and use

o p to adjust the sound volume of

each speaker to be equal.

Front L / Center / Front R / Surround R /

Surround L / Subwoofer

Select the speaker.

• –12.0dB – +12.0dB (0.0dB) : Adjust the volume.

• When o is pressed while the subwoofer volume

is set to “–12 dB”, the “Subwoofer” setting

switches to “OFF”.

• When “Channel Level” is adjusted, the adjusted

values are set for all the surround modes. To

adjust the channel level separately for the

different surround modes, use the operation

see vm page 25 “Adjusting the volume of

the speakers“.

NOTE

• Speakers set to “None” in the “Speaker Conﬁ g.”

(vpage5) settings are not displayed.

• When a headphones jack is inserted in the

PHONES jack of this unit, the “Channel Level”

is not displayed.

Press ENTER to enter the setting.

Test Tone Start

Default

Channel Level

Default

The “Channel Level” settings are

returned to the default settings.

• Yes : Reset to the defaults.

• No : Do not reset to the defaults.

Press BACK.

Speaker Config.

Bass Setting

Distance

Channel Level

Crossover Freq.

Test Tone Start

Default

Speaker Setup

Distance (Cont.)

Channel Level

Default settings are underlined.

1.AVR1513E3_ENG_IM_GS_00A_0214校了後修正.indd 71.AVR1513E3_ENG_IM_GS_00A_0214校了後修正.indd 7 2012/02/14 20:03:322012/02/14 20:03:32

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Denon AVR-1513 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Receiver Denon AVR-1513