Denon AVR-E200 Owner's Manual download pdf (Page 9)

8

ENGLISHFRANÇAISESPAÑOLPORTUGUÊSESPAÑOLNEDERLANDSSVENSKA

Connect Preparation PlaybackSetup

8

ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA

3

Use ui to select a speaker, and use

o p to adjust the sound volume of

each speaker to be equal.

Front L / Center / Front R / Surround R /

Surround L / Subwoofer

A test tone is output from the selected

speaker. While listening to the test tone,

adjust the output from the selected speaker

so that it matches the sound output from the

other speakers. Ideally, all speakers should

provide the same sound output.

•–12.0dB – +12.0dB (0.0dB) : Adjust the volume.

•When o is pressed while the subwoofer volume

is set to “–12 dB”, the “Subwoofer” setting

switches to “Off”.

•When “Levels” is adjusted, the adjusted values

are set for all the surround modes. To adjust

the channel level separately for the different

surround modes, use the operation see vm

page 27 “Adjusting the volume of the speakers”.

NOTE

•Speakers set to “None” in the “Speaker Conﬁg.”

(vpage6) settings are not displayed.

•When a headphones plug is inserted in the

PHONES jack of this unit, the “Levels” is not

displayed.

•While speaker level settings can be

accomplished by listening to the test tones and

switching between the speakers and making

adjustments, a sound pressure level meter can

aid in the process. You might also be able to

use your smartphone as a sound pressure level

meter by downloading a sound pressure level

app from your smartphone app source.

4

Press ENTER to enter the setting.

Test Tone Start

Set Defaults

1

Levels

Enter ReturnENTER

BACK

Set Defaults

The “Levels” settings are returned

to the default settings.

•Yes : Reset to the defaults.

•No : Do not reset to the defaults.

5

Press BACK.

Speaker Config.

Distances

Levels

Crossovers

Bass

Test Tone Start

Set Defaults

Speakers

Enter ReturnENTER

BACK

Levels

1

Use ui to select “Crossovers”, and

then press ENTER.

Speaker Config.

Distances

Levels

Crossovers

Bass

Front

Center

Surround

Speakers

Enter ReturnENTER

BACK

Front

Center

Surround

80Hz

80Hz

80Hz

1

Crossovers

Enter ReturnENTER

BACK

Crossovers

1

Use ui to select “Levels”, and then

press ENTER.

Speaker Config.

Distances

Levels

Crossovers

Bass

Test Tone Start

Set Defaults

Speakers

Enter ReturnENTER

BACK

Test Tone Start

Set Defaults

1

Levels

Enter ReturnENTER

BACK

2

Press ENTER.

Output test tone.

0.0dB

0.0dB

0.0dB

0.0dB

0.0dB

0.0dB

Front L

Center

Front R

Surround R

Surround L

Subwoofer

1

Levels

Enter ReturnENTER

BACK

Default settings are underlined.

vSee overleaf

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments