Denon AVR-1910 User Manual download pdf (Page 67)



Getting Started

Connections Playback Remote Control Information

ENGLISH

Multi-ZoneSettings

Turn off the power using on the main unit.

Press while simultaneously pressing and on the main unit.

Once the display starts ashing at intervals of about 1 second, release the two

buttons.

If in step 3 the display does not ﬂash at intervals of about 1 second, start over from step 1.

Restoring all the settings to as they were at the

time of purchase

(Resetting the Microprocessor)

Perform this procedure if the display is abnormal or if operations cannot be performed.

When the microprocessor is reset, all the settings are reset to their default values.

Audio section

• Power ampliﬁer

Rated output:

 Front (A, B):

90 W+

90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)

125 W+125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Center:

90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)

125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Surround:

90 W+90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)

125 W+125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Surround Back:

90 W+90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)

125 W+125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

  Output connectors: Front: A or B 6～16 Ω/ohms

A + B 12

～16 Ω/ohms

Center, Surround, Surround Back / Amp Assign:

6～16 Ω/ohms

• Analog

Input sensitivity / Input impedance:

200 mV / 47 kΩ/kohms

Frequency response:

10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)

S/N:

100 dB (IHF-A weighted, DIRECT mode)

Video section

• Standard video connectors

Input / output level and impedance:

1 Vp-p, 75 Ω/ohms

Frequency response:

5 Hz ~ 10 MHz — +1, –3 dB

• Color component video connector

Input / output level and impedance:

Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

B / CB signal — 0.7 Vp-p, 75 Ω/ohms

R / CR signal — 0.7 Vp-p, 75 Ω/ohms

Frequency response:

5 Hz ~ 60 MHz — +0, –3 dB

Tuner section [FM] [AM]

(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10

-15

Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz

Usable Sensitivity: 1.2 µV (12.8 dBf) 18 µV

50 dB Quieting Sensitivity: MONO 2.8 µV (20.2 dBf)

STEREO 48.7 µV (45.0 dBf)

S/N (IHF-A): MONO 70 dB

STEREO 67 dB

Total harmonic Distortion (at 1 kHz): MONO 0.7 %

STEREO 1.0 %

General

Power supply: AC 120 V, 60 Hz

Power consumption:

5.5 A

0.3 W (Standby)

Maximum external dimensions:

434 (W) x 171 (H) x 377 (D) mm (17-3/32” x 6-47/64” x 14-27/32”)

Weight: 10.7 kg (25 lbs 5.7 oz)

Remote control unit (RC-1117)

Batteries: R6/AA Type (two batteries)

Maximum external dimensions:

52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)

Weight: 184 g (Approx 6.5 oz) (including batteries)

z For purposes of improvement, speciﬁcations and design are subject to change without notice.

Speciﬁcations

Troubleshooting

Speciﬁcations

1 2 ... 62 63 64 65 66 67 68 69 70 71 72

Comments to this Manuals

No comments

Denon AVR-1910 User Manual Page 67

Comments to this Manuals

Related products and manuals for Acoustics Denon AVR-1910