Denon AVR-4308CI User Manual download pdf (Page 33)

i/p Scaler

Make settings for i/p scaler function.

[Selectable items] A to H

A to H & H to H

OFF

HDMI Setup

Make settings for HDMI video/audio output.

F Menu tree F

Manual Setup

HDMI Setup

a i/p Scaler

s Resolution

d Progressive Mode

f Aspect

g Color Space

h RGB Range

j Auto Lip Sync

k Audio

l Monitor Out

Resolution

Make settings for resolution of HDMI video output signal.

[Selectable items] Auto

480p/576p

1080i

720p

1080p

NOTE

• It is not possible to convert “1080i” signals into “720p” format.

• It is not possible to convert “720p” signals into “1080i” format.

This can be set when “i/p Scaler” is set to anything other than “OFF”.

Progressive Mode

Select optimum progressive mode for video material.

[Selectable items] Auto

Video1

Video2

This can be set when “i/p Scaler” is set to anything other than “OFF”.

Aspect

This sets the aspect ratio when outputting 480i/576i or

480p/576p input signals from the HDMI output connector.

[Selectable items]

Full

Normal

This can be set when “i/p Scaler” is set to anything other than “OFF”.

Color Space

Make settings for output color space.

[Selectable items] YCbCr

RGB

When connected to a monitor with a DVI-D connector (HDCP

compatible) using an HDMI/DVI converter cable, the signals are output

in RGB format, regardless of this setting.

RGB Range

Make settings for RGB output range.

[Selectable items] Normal

Enhanced

A to H & H to H setting

• Deep color (10 bit/12 bit) signals are converted into 8-bit signals.

• The i/p scaler function does not work if xvYCC or computer’s

resolution signals are input.

Auto Lip Sync

Automatic compensation for timing shift in audio and video

output.

[Selectable items] ON

OFF

Audio

Select HDMI audio output device.

[Selectable items] Amp

Monitor Out

Make settings for HDMI monitor output.

[Selectable items] Auto (Dual)

Monitor 1

Monitor 2

Operating from the main remote control unit

Press the M.SEL button.

Auto (Dual) Monitor 1

Monitor 2

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting

• When “Monitor Out” is set to “Auto (Dual)”, connections with

the MONITOR 1 or MONITOR 2 connectors are recognized

automatically.

• If both the MONITOR 1 and 2 connectors are connected and

“Resolution” is set to “Auto”, the signals are output with a resolution

compatible with both monitors.

• If “Resolution” is set to something other than “Auto”, check the

resolutions with which your monitor is compatible at GUI menu

“Information” – “HDMI Information” – “Monitor 1” and “Monitor 2”

and set accordingly (vpage 46).

When “YCbCr” is selected under “Color Space”, “RGB Range” will

have no effect.

2.AVR4308_P28~46.indd 3 2008/02/14 10:46:18

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 109 110

Comments to this Manuals

No comments

Denon AVR-4308CI User Manual Page 33

Comments to this Manuals

Related products and manuals for Acoustics Denon AVR-4308CI