Denon AVR-4802R User Manual download pdf (Page 8)

- 8 -

EVENT PARAMETER function example

PS TONE DEFEAT ON PARAMETER setting PSTONE DEFEAT ON<CR>

TONE DEFEAT OFF TONE DEFEAT ON/OFF PSTONE DEFEAT OFF<CR>

SB:MTRX ON SURROUND BACK SP MODE set PSSB:MTRX ON<CR>

SB:NON MTR X ---MTRX ON = SURR.EX ON = DSCRT ON = NRML PSSB:NON MTRX<CR>

SB:OFF (@THX) (@ES DSCRT) (PL2, NEO6) PSSB:OFF<CR>

CINEMA EQ.ON CINEMA EQ. ON/OFF PSCINEMA EQ.ON<CR>

CINEMA EQ.OFF PSCINEMA EQ.OFF<CR>

MODE : MUSIC CINEMA / MUSIC /PL mode change PSMODE : MUSIC<CR>

MODE : CINEMA (This parameter can change DOLBY PL2,NEO:6 mode.) PSMODE : CINEMA<CR>

MODE : EMULATION ---Invalid at AVR-4802R PSMODE : EMULATION<CR>

MODE : PRO LOGIC --- EMU. & PL can change ONLY DOLBY PL2 mode. PSMODE : PRO LOGIC<CR>

TF UP TUNER Frequency UP/DOWN , direct change TFUP<CR> *

DOWN TFDOWN<CR> *

****** (6 digits)

--- ****.** kHz at AM band (>050000 is AM.)

****.** MHz at FM band (<050000 is FM.)

TF105000<CR>

(1050.00kHz at AM)

TP UP TUNER PRESET CH UP/DOWN , direct change to No.** TPUP<CR>

DOWN TPDOWN<CR>

**(PRESET No.) TPA1<CR>

(PRESET No.”A1”)

TM TUNER BAND , MODE Select

AM ---Band set to AM TMAM<CR>

FM ---Band set to FM TMFM<CR>

AUTO ---Tuning mode set to AUTO mode TMAUTO<CR> *

MANUAL ---Tuning mode set to MANUAL mode TMMANUAL<CR> *

TF, TP, TM COMMAND : '*' parameters can NOT operate when INPUT source isn’t TUNER.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Denon AVR-4802R User Manual Page 8