Denon AVR-983 User Manual download pdf (Page 22)

Select the mode.

Select “Auto” or “Manual”.

• Auto:

Adjust the level while listening to the test tones produced

automatically from the different speakers.

• Manual:

Select the speaker from which you want to produce the test tone to

adjust the level.

Example: When the “Auto” mode is selected

Select “Test Tone Start”.

Select “Ye s”.

a. If the “Auto” mode is selected:

Test tones are automatically emitted from the different speakers.

The test tones are emitted from the different speakers in the

following order, at 4-second intervals the first time and second time

around, 2-second intervals the third time around and on:

Use the CURSOR left and right buttons to adjust all the speakers to the

same volume.

The volume can be adjusted between –12 dB and +12 dB in units of

0.5 dB.

b. When the “Manual” mode is selected

Use the CURSOR up and down to select

the speaker for which you want to output

test tones, then use the CURSOR left and

right to adjust so that the volume of the

test tones from the various speakers is

the same.

Example: When the volume is set to –11.5 dB

while the test tone is being

produced from the Front Lch

speaker

Example: When the volume is set to –11.5 dB

while the Front Lch speaker is

selected

Flashing

FL C FR SR SBR SBL SL SW

1spkr

2spkrs

When the surround back speaker setting is set to “1spkr” for

“Speaker Configuration”, this is set to “SB”.

After the above settings are completed, press the ENTER button.

The “Channel Level” screen reappears.

To cancel the settings, select “Level Clear” and “Yes” on the “Channel Level” screen, then make the settings again.

The level of each channel should be adjusted to 75 dB (C-weighted, slow meter mode) on a sound level meter at the listening position.

If a sound level meter is not available adjust the channels by ear so the sound levels are the same. Because adjusting the subwoofer level test

tone by ear is difficult, use a well known music selection and adjust for natural balance.

NOTE: When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer’s own volume control.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 75 76

Comments to this Manuals

No comments

Denon AVR-983 User Manual Page 22

Comments to this Manuals

Related products and manuals for Acoustics Denon AVR-983