Denon DP-500M User Manual download pdf (Page 4)

• Do not plug in the power cord until assembly is com-

pleted.

(1) Mounting the turntable

Remove all the parts in the box.

Remove the packaging materials from the main unit

and all the parts.

• Set the parts on the ﬂoor, a table or another stable

surface when removing the packaging materials.

Handling the parts roughly could result in scratches

or deformation.

Insert the turntable onto the motor shaft.

• Be careful not to scratch the magnet ring on the bot-

tom side of the turntable.

Set the turntable sheet on the turntable, lining it up

with the motor shaft.

(2) Mounting the counterweight.

Mount the counterweight on the shaft at the back of

the tone arm.

2. ASSEMBLY

Turntable sheet

Turntable

Motor shaft

(3) Mounting the cartridge

• The cartridge is not included.

Mount your cartridge on the head shell.

• The head shell's lead wires are color-coded. Use

tweezers or the like to securely connect the lead

wires to the corresponding terminals on the cartridge,

referring to the indications on the cartridge or the car-

tridge’s instructions.

Red .......................... right channel (R)

White........................ left channel (L)

Green....................... right channel ground (RG)

Blue.......................... left channel ground (LG)

•A predetermind overhang will be obtained, if it

attaches so that the needle point may come to the

position of 54mm from head shell attachement

edge(rubber washer part) as shown in the following

ﬁgure.

Insert the head shell on which the cartridge has

been mounted into the tone arm and fasten it in

place using the lock nut.

(4) Mounting the dust cover

Securely insert the two included hinges into the

holder in the rear of the cabinet.

Line up with the hole of dust cover with the hinges

and insert it securely in the direction of the arrows.

•To remove the dust cover, open it fully and pull it out

of the hinges in the opposite direction of the arrows.

• Hold the dust cover near the hinges when mounting

and removing it.

54mm

head shell

cartridge

(sold separately)

OUTPUT

GND

Holder

Hinge

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Denon DP-500M User Manual Page 4

Comments to this Manuals

Related products and manuals for Acoustics Denon DP-500M