Denon DRW-585 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
ENGLISH
RELAY PLAY (continuous playback of the tapes in deck A and deck B)
• Load a cassette tape into deck A and B, and set the Dolby NR button correctly.
© REVERSE MODE set to "RELAY".
® Press the PLAY button of the deck you first wish to listen to.
© To stop relay play, press the stop ( ■ ) button of the deck currently
playing the tape.
» Relay play will play decks A and B in succession for 6 cycles, upon
which playback stops. When playback starts from deck B, when
switching to deck A, the first deck A playback cycle will be counted
as the second cycle. The completion of 5 cycles will always be at the
opposite side of the tape in deck B.
■ MUSIC SEARCH SYSTEM
The music search system detects blank sections (lasting for at least 4
seconds) between selections in order to locate the beginning of selections
in the forward or reverse direction.
1. To advance from the current selection to the beginning of the next
selection (CUE):
Press the PLAY button, keep it pressed in, and press the Fast Forward
( ►► ) button when the tape is travelling in the forward { t> ) direction.
Press the PLAY button, keep it pressed In, and press the Rewind ( 44 )
button when the tape is travelling in the reverse ( <] ) direction.
The tape transport indicator flashes.
The deck will skip the rest of the current selection and automatically
resume play from the beginning of the next selection.
2. To repeat playback from the beginning of the current selection
(REVIEW):
Press the PLAY button, keep it pressed In, and press the Rewind ( 44 )
button when the tape is travelling in the forward ( C> ) direction.
Press the PLAY button, keep it pressed in, and press the Fast Forward
( ►► ) button when the tape is travelling in the reverse ( <3 ) direction.
The tape transport indicator flashes.
The deck will rewind the tape to the beginning of the current selection
and automatically resume play from that point.
This is very convenient for repeating playback of the current selection.
Notes on Music Search Operation:
The search functions operates by detecting comparatively long, blank
sections approximately 4 to 5 seconds long, in between recorded
selections. Therefore, the system may not operate normally in the
following cases:
Recordings with discontinuous speech or conversation.
Recordings with long periods of pianissimo (softly played music).
Recordings with long silences.
Blank sections with a high level of noise.
Blank sections shorter than 4 seconds.
If noise-emitting appliances, such as electric razors, drills, refrigerators,
etc., are operated nearby.
REV close to the beginning of the program or CUE close to the ending.
9
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments