Denon S-32 User Manual download pdf (Page 11)



Getting Started Setup Playback Information Troubleshooting

ENGLISH

Format Bit rate Per minute Per hour

MP3 / WMA

MPEG-4 AAC

128 kbps Approx. 1 MB Approx. 60 MB

192 kbps Approx. 1.5 MB Approx. 90 MB

256 kbps Approx. 2 MB Approx. 120 MB

392 kbps Approx. 3 MB Approx. 180 MB

WAV (LPCM) 1400 kbps Approx. 10 MB Approx. 600 MB

FLAC 1080 kbps Approx. 7.7 MB Approx. 464 MB

(1 MB = 10

bytes)

Required System

n Broadband Internet Connection

A broadband line connection to the Internet is required in order to

use the S-32’s Internet radio function.

n Modem

This is a device that is connected to the broadband line to

communicate with the Internet.

n Router

When using the S-32, we recommend you to use a router equipped

with the following functions:

• Built-in DHCP (Dynamic Host Conﬁguration Protocol) server

This function automatically assigns IP addresses on the LAN.

• Built-in 100 BASE-TX switch

When connecting multiple devices, we recommend a switching

hub with a speed of 100 Mbps or greater.

n Ethernet Cable (CAT-5 or greater recommended)

The S-32 does not come with an Ethernet cable.

Purchase a cable of the required length.

n Computer

A computer with the following speciﬁcations is required to operate

the music server:

• OS

Windows® XP Service Pack2, Windows Vista

• Software

.NET Framework 1.1, Windows Media Connect (Windows XP),

Windows Media Player Ver.11

• Internet browser

Microsoft Internet Explorer 5.01 or later

• LAN port

• 300 MB or more free disk space

b Free space is required to save music ﬁles. The following sizes are

approximate.

• Depending on the server, video ﬁles may be displayed, but they

cannot be played on the S-32.

• For connections to the Internet, contact an ISP (Internet Service

Provider) or a computer shop.

• The types of routers that can be used depend on the ISP. Contact an

ISP (Internet Service Provider) or a computer shop for details.

NOTE

A contract with an ISP is required to connect to the Internet.

No additional contract is needed if you already have a broadband

connection to the Internet.

n Others

• If you have an ISP contract for a line on which network settings are

made manually, make the settings at “Network Setting” (vpage

9, 10).

• When using a broadband router (DHCP function), the S-32 makes

the network settings automatically, so there is no need to make

them yourself.

• If connecting the S-32 to a network with no DHCP function, make

the settings at “Network Setting” (vpage 9, 10).

• The S-32 is not compatible with PPPoE. A PPPoE-compatible router

is required if you have a contract for a line of the type with which

the PPPoE is set.

• Depending on the ISP with which you have your contract, it may

be necessary to make proxy server settings to use the Internet

radio function. If you made proxy server settings on the computer

to connect to the Internet, make the same proxy server settings on

the S-32.

• The S-32 uses the DHCP and Auto IP functions to make the network

settings automatically.

n Ethernet Cable (CAT-5 or greater recommended)

No Ethernet cable is included with the S-32. Procure a cable with

the necessary length.

NOTE

Be sure to use a shielded type cable for Ethernet connections.

Depending on the connected computer/router, there may be much

noise generated from the cable.

Connections

Power cord (Supplied)

To household power outlet

(AC 230 V, 50 Hz)

Connecting the Power Cord

NOTE

• Only use the supplied power cord.

• Be sure the power cord is unplugged from the power outlet before

connecting or disconnecting it to the AC inlet.

Protector circuit

The protection circuit will be activated in the following cases:

• When the temperature around the set is extremely high

• When the set is used for long periods of time with a high output

and the internal temperature rises

Speaker output is suspended when the protector circuit operates.

In this case, remove the power cord, make sure there is adequate

ventilation and wait for the main unit to cool down. Afterwards, re-

insert the power cord.

If the protection circuit is activated again even though there are no

problems with the wiring or the ventilation around the unit, switch off

the power and contact a DENON service center.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments

Denon S-32 User Manual Page 11

Comments to this Manuals

Related products and manuals for Acoustics Denon S-32