Denon SYS-76HT User Manual download pdf (Page 12)

ENGLISH

(1) Connecting the line input connector (LINE IN) – Active subwoofer (DSW-76)

Connect this to the pre-out connector for the active subwoofer on the AV surround receiver (or amplifier)

(“SUBWOOFER PREOUT”, “MONO OUT”, etc.) using the included connection cord (3-meter RCA pin-plug

cord).

CAUTION:

• If this connector is connected to the pre-out connector for the surround center channel of a stereo amplifier

or AV surround receiver (or amplifier), only the center channel’s bass sound will be produced, so the overall

bass sound will be insufficient.

CAUTION:

• Do not plug the power supply cord into an AC power outlet until all connections have been completed.

• Check the left and right channels and be sure to interconnect them properly, L (left) to L, R (right) to R.

• Plug the power supply cord in securely. An insecure connection could cause noise.

• Note that clamping pin-plug cords and power supply cords together or running pin-plug cords near the power

transformer could result in humming or noise.

• Check the polarities of the speakers and AV surround receiver (or amplifier) and be sure to interconnect

properly. Connect the red terminal on the speaker to the “+” speaker terminal on the AV surround receiver

(or amplifier), the black terminal on the speaker to the “–” speaker terminal on the AV surround receiver (or

amplifier).

Active subwoofer (DSW-76)

Included connection cord

(3-meter RCA pin-plug cord)

CONNECTIONS

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 78 79

No comments

Denon SYS-76HT User Manual Page 12