Denon AVR-1908 Owner's Manual download pdf (Page 14)

ENGLISH



Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting

With HDMI connections, the video and audio signals can be transferred with a single cable.

065

)%.*

Compatible

audio format

Details

Discs

(examples)

2-channel linear

PCM

2ch 32-192 kHz

16/20/24 bits

CD, DVD-Video,

DVD-Audio

Multi-channel

linear PCM

8ch 32-192 kHz

16/20/24 bits

DVD-Audio

Dolby Digital, DTS Bitstream DVD-Video

MonitorDVD player

b The AVR-1908 is equipped for HDMI version 1.3a. This

version is compatible with other versions, allowing

connection to all components equipped with an HDMI

connector.

b The AVR-1908 is compatible with 30- and 36-bit Deep

Color.

In order to play the digital video and audio signals of a DVD-

Video or DVD-Audio disc using HDMI/DVI connections, both

the connected DVD player and monitor must be equipped

for a copyright protection system called “HDCP” (High-

bandwidth Digital Content Protection).

HDCP is a copy protection technology consisting of data

encoding and mutual identiﬁcation of the devices.

The AVR-1908 is HDCP-compatible. For details on the

DVD player or monitor you are using, refer to its operating

instructions.

• When the AVR-1908 and DVD player are connected using an HDMI cable, also connect the AVR-1908 and

monitor using an HDMI cable.

• If the connected monitor or DVD player only has a DVI-D connector, use an HDMI/DVI converter cable.

When using a DVI cable, no audio signals are transmitted.

• Use a Deep Color compatible cable for connection to Deep Color compatible devices.

When connecting with an HDMI/DVI converter cable (adapter)

• HDMI video signals are theoretically compatible with the DVI format.

When connecting to a monitor, etc., equipped with a DVI-D connector, connection is possible using an

HDMI/DVI converter cable, but depending on the combination of components in some cases the video

signals will not be output.

• When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly

due to poor connections with the connected cable, etc.

• By default, the HDMI audio signals are output from the speakers connected to the AVR-1908.

• To output the sound from the TV, make the settings at menu “Manual Setup” – “HDMI Setup” – “TV”

(vpage 25).

NOTE

• Use a CPPM-compatible DVD player to play DVD-Audio discs that are copyright-protected by CPPM.

• The AVR-1908 cannot be controlled from another device via the HDMI cable.

• The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted

by the connected device.

• Video signals are not output properly when using devices that are not HDCP-compatible.

• Video signals are not output if the input video signals do not match the monitor’s resolution. In this case,

switch the DVD player’s resolution to a resolution with which the monitor is compatible.

• If the menu “Manual Setup” – “HDMI Setup” setting (vpage 25) is set to “AMP”, the sound may be

interrupted when the monitor’s power is turned off.

• Use a cable on which the HDMI logo is indicated (a certiﬁed HDMI product) for connection to the HDMI

connector. Normal playback may not be possible when using a cable other than one on which the HDMI

logo is indicated (a non-HDMI-certiﬁed product).

• If the monitor or DVD player does not support deep color, deep color signal transfer is not possible.

• If the monitor or DVD player does not support xvYCC, xvYCC signal transfer is not possible.

Connecting Equipment with HDMI connectors

1.AVR1908E3_ENG_109.indd 14 2007/10/05 16:31:47

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 73 74

Comments to this Manuals

No comments

Denon AVR-1908 Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Audio amplifiers Denon AVR-1908