Denon AVP-A1HD Owner's Manual download pdf (Page 33)



Getting Started Connections Other Operations Multi-Zone Information Troubleshooting SpeciﬁcationsSetup

h Trigger Out 1

AVC-A1HD

k Trigger Out 1

AVP-A1HD

Select the conditions to turn on the trigger out 1 with respect to

the zone, input source, surround mode, HDMI monitor, etc.

For details about the trigger out function, see mpage 22.

j Trigger Out 2

AVC-A1HD

l Trigger Out 2

AVP-A1HD

This sets the conditions to turn on the trigger out 2, in the same

way as “Trigger Out 1” above.

k Trigger Out 3

AVC-A1HD

A0 Trigger Out 3

AVP-A1HD

This sets the conditions to turn on the trigger out 3, in the same

way as “Trigger Out 1” above.

l Trigger Out 4

AVC-A1HD

A1 Trigger Out 4

AVP-A1HD

This sets the conditions to turn on the trigger out 4, in the same

way as “Trigger Out 1” above.

[Selectable items]

– – –

Setting with Respect to the Zone

When the power of the zone turned on/off, the trigger out turns on.

Setting with Respect to the Input Source

When the input source set to on is selected, the trigger out turns on.

Associated with respect to the input source for zones set to “ON” at

“Setting with Respect to the Zone”.

A0 Transducer Setup

AVC-A1HD

A2 Transducer Setup

AVP-A1HD

Settings when using transducer.

The Transducer Setup can be accessed through GUI menu “Speaker

Setup” – “Subwoofer Setup” is “1SP”, “2SP L/R” or “2SP MIX”. The

transducer signal is outputted from “SW3”.

Level

[Variable range]

–12dB

0dB

+12dB

Set the transducer level.

OFF

Turn the transducer output off.

Setting with Respect to the Surround Mode

When the surround mode set to on is selected, the trigger out turns

on.

Setting with Respect to the Monitor

When the HDMI monitor set to on is selected, the trigger out turns

on.

This is effective when the “MAIN ZONE” has been set to “ON” for

the “Setting with Respect to the Zone” and the input source which is

set to “ON” has been selected for the “Setting with Respect to the

Input Source”.

This is effective when the “MAIN ZONE” has been set to “ON” for

the “Setting with Respect to the Zone” and the input source which is

set to “ON” has been selected for the “Setting with Respect to the

Input Source”.

When you adjust “Level”, the adjusted value is set for all surround

modes. To adjust the level for individual surround modes, use “Channel

Level” (vmpage 65

AVC-A1HD

, mpage 67

AVP-A1HD

LPF

Set the upper limit of the low frequency output to the transducer.

[Selectable items]

40Hz

60Hz

80Hz

90Hz

100Hz

110Hz

120Hz

150Hz

200Hz

250Hz

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 73 74

Comments to this Manuals

No comments

Denon AVP-A1HD Owner's Manual Page 33

Comments to this Manuals

Related products and manuals for AV receivers Denon AVP-A1HD