Denon AVR-1613 Owner's Manual download pdf (Page 99)

Speakers

Setting items Setting details

Crossovers

Set the maximum frequency

of the bass signal output

from each channel to

the subwoofer. Set the

Crossover Frequency to

suit the bass reproduction

capability of the speaker

being used.

Crossover : Set the crossover frequency.

•40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

250Hz / Individual : Set the crossover frequency for all speakers. See the

speaker manual for information concerning speaker crossover frequency.

The following settings can be set when the “Crossover” setting is set to

“Individual”.

•Front / Center / Surround : Select speaker for setting of crossover

frequency.

•40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

250Hz : Set the crossover frequency.

•“Crossovers” can be set when the “Bass” – “Subwoofer Mode”

(vpage94) setting is “LFE+Main”, or when you have a speaker that

is set to “Small”.

•Always set the crossover frequency to “80Hz”. When using small

speakers, however, we recommend setting the crossover frequency to

a higher frequency.

•For speakers set to “Small”, sound below the crossover frequency

is cut from the sound output. The cut bass sound is output from the

subwoofer or front speakers.

•The speakers that can be set when “Individual” is selected differ

depending on to the “Subwoofer Mode” setting (vpage94).

•When “LFE” is selected, speakers set to “Small” at “Speaker Conﬁg.”

can be set. If the speakers are set to “Large”, “Full Band” is displayed

and the setting cannot be made.

•If set to “LFE+Main”, this setting can be made regardless of the

speaker size.

Basic version

Advanced version

Information

Advanced version

DVD

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 130 131

No comments

Denon AVR-1613 Owner's Manual Page 99