Denon AVR-1713 Owner's Manual download pdf (Page 26)

Calculation

Set up speakers (Audyssey

Setup)

Repeat step 9, measuring positions 3 to 8.

When measurement of position 8 is completed, a

“Measurements Complete.” message is displayed.

Repeat Last Test

Audyssey Setup

Measurements Complete.

Calculation

MultEQ XT

Select “Calculation” and then press ENTER.

Measuring results are analyzed, and the frequency response of

each speaker in the listening room is determined.

Audyssey Setup

Calibration complete! Now Calculating...

Please wait...

MultEQ XT

75%

•Analysis takes several minutes to complete. The more speakers

and measurement positions that there are, the more time it takes

to perform the analysis.

Measurement (2nd – 8th)

•In this step, you will perform measurements at multiple positions

(two to eight positions) other than the main listening position.

•Just one position can be measured but measuring multiple positions

increases the accuracy of the correction of acoustic distortion within

the listening area.

Move the setup microphone to

position 2, select “Continue”,

and then press ENTER.

The measurement of the second

position starts. Measurements can be

made in up to eight positions.

Audyssey Setup

Place the microphone at ear level at 3rd

Listening position.

Continue

Calculation

MultEQ XT

Repeat Last Test

Audyssey Setup

Place the microphone at ear level at 2nd

Listening position.

Continue

Calculation

MultEQ XT

•To skip measuring the third and subsequent listening position, use

ui to select “Calculation” and press ENTER to proceed to step

12.

•To measure the second position again, use ui to select “Repeat

Last Test” and press ENTER.

Basic version

Advanced version

Information

Basic version

v See overleaf

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

Comments to this Manuals

No comments

Denon AVR-1713 Owner's Manual Page 26

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1713