Denon AVR-686 Operations Instructions download pdf (Page 26)

Basic Operation

• Surround parameters _3_

CINEMA EQ. (Cinema Equalizer):

The Cinema EQ function gently decreases the level of the

extreme high frequencies, compensating for overly-bright

sounding motion picture seundtracks. Select this function if the

sound frem the frent speakers is tee bright.

This function only works in the Delby Pro Logic ]][x, Delby

Digital, DTS Surround and DTS NEe:6 modes. (The same

contents are set for all operating modes.)

D.COMP. (Dynamic Range Compression):

Motion picture soundtracks have tremendous dynamic range

(the contrast between very soft and very leud sounds). For

listening late at night, or whenever the maximum sound level is

lower than usual, the Dynamic Range Compression allows you

to hear all of the sounds in the soundtrack (but with reduced

dynamic range). (This only works when playing program

sources recorded in Dolby Digital or DTS). Select one of the

four parameters ("OFF", "LOW", "MID" (middle) er "HIGH").

Set te "OFF" fer normal listening.

LFE (Low Frequency Effect):

This sets the level of the LFE (Low Frequency Effect) sounds

included in the seurce when playing pregram sources recorded

in Delby Digital or DTS.

If the sound preduced from the subweefer sounds disterted

due to the LFE signals when playing Dolby Digital or DTS

sources when the peak limiter is turned eff with the subweefer

peak limit level setting, adjust the level as necessary.

Program source and adjustment range:

1. DelbyDigital: -10dBte0dB

2. DTS Surround: -10 dB to 0 dB

÷ When DTS encoded movie software is played, it is

recommended that the LFE LEVEL be set to 0 dB for

correct DTS playback.

'_ When DTS encoded music software is played, it is

recommended that the LFE LEVEL be set to -10 dB for

correct DTS playback.

TONE:

This enables tone control. This can be set individually fer the

separate surround modes ether than DIRECT mode.

SB CH OUT (Surreund Back):

(1) MultFchannel source

• OFF:

Playback is conducted without using the surround back

speaker.

• NON MTRX:

The same signals as these of the surround channels are

output from the surreund back channels.

• MTRX ON:

The surround back channel is repreduced using digital matrix

processing.

• ES MTRX:

When playing DTS signals, the surreund back signals underge

digital matrix precessing for playback.

• ES DSCRT:

When a signal identifying the source as a discrete 6.1=channel

source is included in the DTS signals, the surround back

signals included in the source are played.

• PL]][x Cinema:

Processing is perfermed with the Cinema mode of the PL]][x

decoder and the surreund back channel is repreduced.

• PL]][x Music:

Processing is perfermed with the Music mode of the PL]][x

decoder and the surreund back channel is repreduced.

(2) 2ch source

• OFF:

Playback is conducted witheut using the surreund back speaker.

• ON:

Playback is conducted using the surreund back speaker.

Basic Operation

• Dialogue normalization

The dialog nermalizatien functien is activated autematically when

playing Dolby Digital program sources.

Dialog nermalizatien is a basic function of Delby Digital which

automatically normalizes the dialog level (standard level) of the

signals which are recorded at different levels for different

program sources, such as DVD, DTV and ether future formats

that will use Dolby Digital.

These contents can be verified with the STATUSbutton.

: :=,,. :,,. ,...=,,, : .....

The number indicates the normalization level when the

currently playing program is normalized to the standard

level.

L ENGLISH ]

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 60 61

Comments to this Manuals

No comments

Denon AVR-686 Operations Instructions Page 26

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-686