Denon DN-V500BD Owner's Manual download pdf (Page 17)

Connections

ENGLISH

Connections

ENGLISH

Introduction Connections Playback Function Setup Others

Press <HDMI RESOLUTION> to select the HDMI output mode. HDMI video resolution changes as

following.

“480i” and “480p” will be displayed only when an NTSC disc or a1080p/24 frame material is being

played back.

HDMI Output Mode and Actual Output Signals

Front Panel Display HDMI Video Resolution

480 Interlaced

576 Interlaced

Press <HDMI RESOLUTION>

480 Progressive

576 Progressive

Press <HDMI RESOLUTION>

720 Progressive

Press <HDMI RESOLUTION>

1080 Interlaced

Press <HDMI RESOLUTION>

1080 Progressive

Press <HDMI RESOLUTION>

1080 Progressive 24 frame

Press <HDMI RESOLUTION>

Source Direct

Press <HDMI RESOLUTION>

Note

• You can change the HDMI output mode with <HDMI RESOLUTION> during playback as well.

(This is not available during BD/AVCHD playback.)

• Video and audio signals may be distorted temporarily when switching to/from the HDMI output

mode.

• You can also change the HDMI output mode from “HDMI Video Resolution” in the “Video” menu

on the setup menu. Refer to page 31.

• In order to get natural and high quality film reproduction of 24-frame film material, use HDMI

cable (High Speed HDMI cable is recommended) and select “1080p24”, “Auto” or “Source Direct”

if the connected display device is compatible with 1080p24 frame input.

• If the disc contains 1080p24 frame material, 60-frame or 50-frame image will be output unless

“1080p24” is selected.

• For AVCHD and DivX

, 24-frame film material will be output as 60 frame, even if the connected

device is compatible with 1080p24 frame input and “HDMI Video Resolution” is set to “1080p24”,

“Auto” or “Source Direct”.

• When “HDMI Video Resolution” is set to “1080p”, “1080p24” or “Source Direct”, the “Component

Output” will be set to “480i/576i” automatically.

• If the video is not properly from HDMI OUT jack after you set the “HDMI Video Resolution” setting,

change the HDMI video resolution to the compatible resolution by pressing

<HDMI RESOLUTION> or press and hold B on the front panel for more than 5 seconds to reset

the setting.

• “HDMI Deep Color” is available only when the display device is connected by HDMI cable and

supports HDMI Deep Color.

• For “Auto” in “HDMI Deep Color”, using the High Speed HDMI cable is recommended.

E5LA8ED_EN.book Page 12 Wednesday, July 22, 2009 12:57 PM

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

Comments to this Manuals

No comments

Denon DN-V500BD Owner's Manual Page 17

Comments to this Manuals

Related products and manuals for Blu-Ray players Denon DN-V500BD