Denon DN-A300M User Manual download pdf (Page 6)

ENGLISH

ENGLISH

3

Getting Started

Remote control unit

•The included remote control unit can be used to operate DENON PROFESSIONAL CD players, tape

decks and tuners.

•When using it, also refer to the operating instructions of the other devices.

•Some products may not be operable.

POWER button

This operates the main unit’s

power.

SPEAKERS A/B button

This switches the speakers

connected to speaker terminals.

Input selector buttons

These switch the input source.

LOUDNESS button

This amplifier the bass and treble

sound that is hard to hear at low

volume level and achieves a

more natural sound.

Volume +, - buttons

These adjust the volume.

MIC MIX button

This mixes mic input with source

input and outputs them.

MIC AGC button

This adjusts the level to prevent

clipping the sound.

AUTO MUSIC MUTE

button

This outputs source input as its

level is attenuated with the

MUSIC MUTE LEVEL knob on

the rear panel.

Amplifier operating

buttons

CD player block

DENON

PROFESSIONAL

product operating

buttons

0~9, +10 : Number buttons

DISC SKIP :

This button selects the disc,

when using a DENON

PROFESSIONAL multi-disc CD

player.

: Play

: Pause

: Stop

,

: Search

RANDOM : Random

playback

REPEAT : Repeat playback

TUNER block

TUNER PRESET +, -

These switch the preset

channel.

Tape deck block

: Rewind

: Fast-forward

: Reverse play

: Forward play

A/B : Switch between

decks A and B for

double decks

REC : Record

: Pause

: Stop

NOTE:

•Functions ❽, 󰣭, 󰣶 and 󰣷 are only

available when the MIC MIX 󰣮 function is

turned on.

Rear panel

󰣲 SIGNAL GND (ground) terminal

Connect the ground wire from your turntable

here.

󰣸 SPEAKER SYSTEMS terminals

Connect your speakers here.

󰣹 AC OUTLETS

Use these as the power outlets for other audio

devices. Check equipment power requirement

ratings before use(see the ratings as marked

on the rear panel). If in doubt consult with your

dealer or DENON PROFESSIONAL distributor.

•Short-circuiting plugs are inserted into the

PHONO input terminals. Remove these when

connecting a turntable. Be sure to keep it for

future use.

NOTE:

•NEVER insert the short-circuiting pin plug

into the recording output or PRE OUT

terminals. Doing so could result in damage.

NOTE:

•This terminal is not a safety ground.

󰣳 INPUTS terminals

Connect your source equipment here.

󰣴 Recording input/output terminals

(TAPE-1 and TAPE-2)

Connect your recording equipment here.

󰣵 PRE OUT terminals

Use this to add such equipment as a power

amplifier or subwoofer.

󰣶 MIC SENSE LEVEL knob

The mic input sensitivity can be adjusted.

Left turn is low sensitivity.

Right turn is high sensitivity.

󰣷 MUSIC MUTE LEVEL knob

The source input attenuation level can be

adjusted(-20dB ~ 0dB) when mixing mic input

with source input.

•When the VOLUME control knob is set just

beyond the “12 o’clock” position (over

halfway), the adjustments that can be made

with the BASS and TREBLE controls is

decreased.

•When the VOLUME control knob is set to

maximum or turned fully clockwise, the bass

and treble can no longer be adjusted.

MUTE button

Press this to mute the sound.

The power indicator on the main

unit blinks red.

Press again to produce sound.

Getting Started

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Comments to this Manuals

No comments