7
ENGLISH
2
CONNECTIONS/INSTALLATION
(1)CONNECTIONS
1. Turn off the POWER switch.
2. Connect the RCA pin cords to the inputs on your mixer.
3. Connect the control cord to the REMOTE connector on the RC-D60.
CAUTION:
• Be sure to use the supplied control cord. Using another type of cable may result in damage.
• Be sure the power is off when connecting the control cord. Otherwise the units may not work properly.
• Never connect any remote controllers other than the RC-D60.
Doing so can damage the equipment.
(2)INSTALLATION
The DN-D6000 will work normally when the player unit is mounted within 10 degrees off the vertical plane at
the front panel. If the unit is tilted excessively, the disc may not be loaded or unloaded properly.
DN-D6000
Max. 10°
FREQ.
SAMP.
SAMP.
Comments to this Manuals