Denon S1000 - DN Scratch DJ Table Top CD Operations Instructions download pdf (Page 8)

ENGLISH

PLAY/PAUSE button (13)

• This button will start or pause playback.

• Push once to start playback, once again to

pause playback, and once more to resume

playback.

DISC EJECT button

• Push this button to eject the disc.

• The disc will not eject during playback.

Stop playback before pushing this button.

CUE button

• Pushing this button in play mode will force the

track back to the position which playback

started. While in search mode, it makes new

Cue point. (Cue)

• In Cue mode, by pushing the CUE button

makes a Stutter sound from the Cue point. This

is called Stutter play. (Stutter)

Scratch Disc

Use this vinyl scratch disc for scan, manual

search, Pitch Bend and Scratch operations.

FLIP/CLR button

• FLIP:

Use this to select operating mode of A1 and A2

buttons, from Hot Start mode and Stutter

mode. The display will indicate “H/S” or “STR”

• A1, A2 CLR:

If the A1 or A2 button is pushed while pushing

the FLIP button, you can clear the selected A

point.

By holding down just the FLIP button for more

than 1 sec, you can clear A1 and A2 points all

at once.

A1, A2 button

• Using this button you can create starting point

for Hot Start, Seamless Loop and Stutter.

B button

• Use this to set the B point to create a

Seamless Loop after the A point has been set.

EXIT/RELOOP button

• Use this to exit or return back again to

Seamless loop playback. You can add variety to

looping with this function.

(3) Top panel

CAUTION:

• Note that there are many buttons working two

different function selected by short time

pushing or long pushing (1 second or more). The

mark indicates short time push function and

mark indicates long time push function.

NEXT TR./B TRIM button

• When the button is pressed during playback,

the NEXT TRACK MODE is selected. If the

button is pressed again, the *B TRIM MODE is

selected. *Only when a seamless LOOP is set.

In the standby and pause modes, only the B

TRIM MODE can be selected.

TITLE button

• CD TEXT:

When there is CD text data, the CD text data

is displayed automatically or when the button

is pressed or the track is changed.

If no TEXT is available, the display will indicate

“No TEXT”.

• MP3:

When an MP3 file has ID-3 tag data, the title,

artist name and album name are selected and

displayed each time the button is pressed.

TIME, CONT./SINGLE button

• TIME:

A short push will displays mode changes

between ELAPSED TIME and REMAIN TIME.

• 4-way TOTAL TIME display mode can be

selected by PRESET(8).

• At this time, you can select display mode from

four modes, TRACK ELAPSED, TRACK

REMAIN, DISC ELAPSED and DISC REMAIN.

• CONT./SINGLE:

Long pushing play ending mode between

CONT. (continue: play more tracks) and

SINGLE (stop playing and ReCUE’s back to

your set CUE point).

• SINGLE PLAY LOCK:

When SINGLE PLAY LOCK is selected, track

selection during playback is disabled. This

prevents playback from stopping when the

Track Select Knob is turned accidentally during

playback. Play ending mode is the same as

single mode.

MEMO, PRESET button

• MEMO:

The memo mode starts when this button is

pushed once in the Cue mode.

• PRESET:

When this button is pushed for more than 1

sec, the PRESET mode menu is displayed.

The machine status must be in, CUE, PAUSE

or No Disc mode before entering the preset

mode.

PART NAMES AND FUNCTIONS

(1) Front panel

Disc loading slot

• Load the disc slowly, and release it once the

DN-S1000 starts grabbing the disc in.

NOTE:

Please clean the dirt of the label side of a disc

and start loading of the disc.

The dirt causes a slip of a disc loader roller.

POWER button (¢ON £OFF)

• Push this button to turn power on and off.

Analog output jacks

(LINE OUT)

• This is unbalanced RCA output jacks.

• Audio signals outputs.

Fader start jack

• Use this when your mixer has Fader Start

function with 3.5 mm stereo mini cord.

Digital output jack

• Digital data is available from this jack.

• Use 75 Ω/ohms pin cord for connection.

• We recommend you use braided wire type

shielded cable.

NOTE: The playback level after analog

conversion is set to –6dB below the

usual level to avoid digital distortion.

(2) Rear panel

CAUTION:

• Do not turn off the power while a disc is

loading or being ejected. Otherwise loading

mechanism may be damaged.

CAUTIONS:

• Do not load discs when the power is turned

off.

• Do not try to forcibly remove a disc once

the DN-S1000 has started to grab the disc.

• Do not load more than once disc at a time

or insert anything other than discs.

Otherwise loading mechanism may be

damaged.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 34 35

Comments to this Manuals

No comments

Denon S1000 - DN Scratch DJ Table Top CD Operations Instructions Page 8

Comments to this Manuals

Related products and manuals for DJ controllers Denon S1000 - DN Scratch DJ Table Top CD