Denon DVM-745 Operations Instructions download pdf (Page 17)

–

English

Getting started

•Turn on the power of the TV, amplifier and any other com-

ponents which are connected to the DVD player.

• Make sure the TV and audio receiver (commercially avail-

able) are set to the correct channel.

Press the POWER ON button.

• “P-ON” will appear briefly on the display panel.

Press the OPEN/CLOSE button to open disc load-

ing tray.

Press the DISC SKIP button repeatedly or press

the DISC NUMBER button.

• The desired disc tray moves to the front position.

Place the disc in the tray,

with the label facing up.

• Repeat steps and to

load more discs.

Press the PLAY button.

• The tray will close automatically, and playback will start

from the first chapter or track of the disc. If the playback

does not start automatically, press the PLAY button.

• If the disc has not been set on the left side tray, the

DVD player will play the disc which is set on the right

side tray.

• When you want to select the other disc, press the DISC

SKIP button repeatedly or the DISC NUMBER button

for your desired disc.

• When you playback the DVD with a title menu, it may

appear on the screen. In this case, refer to “Title

Menu”.

Press the STOP button to stop playback.

NOTES:

•A “prohibited icon” may appear at the

top-right on the TV screen during oper-

ation, warning that a prohibited opera-

tion has been encountered by the DVD player or the

disc.

•With DVDs that use some titles for playback program

signals, playback may start from the second title, or it

may skip these titles.

• During the playback of two layered disc, pictures may

stop for a moment. This happens when the 1st layer

switches to the 2nd layer. This is not a malfunction.

• During the playback of a DVD-RW which has been

recorded in the VR mode, the sound or picture may

freeze momentarily depended on disc content.

•You can open the tray and change 2 discs during play-

back by pressing the DISC EXCHANGE button.

• Disc position will be displayed on the TV screen when

you press DISC NUMBER or DISC SKIP button.

DivX

WMA

JPEGMP3CDVCDDVD-V

Press the MENU button.

• The DVD main menu will appear.

If the feature is not available, symbol may

appear on the TV screen.

If disc menu is available on the disc, audio lan-

guage, subtitle options, chapters for the title and

other options will appear for selection.

Press the Cursor buttons (K / L / s / B) to select an

item, and the ENTER button to confirm the selection.

DVD-V

DISC PLAYBACK

Basic Playback

Disc Menus

DVD may contain menus to navigate the disc and access spe-

cial features. Press the appropriate Numeric buttons or use the

Cursor buttons (K / L / s / B) to highlight your selection in the

DVD main menu and press the ENTER button to confirm.

NOTE:

•

Unless otherwise stated, all operations described in this

manual are based on remote control use. Some operations

can be carried out using the menu bar on the TV screen.

DVD-V

General Features

HDMI Setup

Press the HDMI button on the front panel to select

the HDMI output mode.

The output mode changes as follows every time

the HDMI button is pressed.

• The HDMI indicator on the front panel lights up when

HDMI output mode is on.

480P (Default): Video output from the HDMI OUT jack at 480p.

720P: Video output from the HDMI OUT jack at 720p.

1080: Video output from the HDMI OUT jack at 1080i.

1080P: Video output from the HDMI OUT jack at 1080p.

OFF:

No video outp

ut from the HDMI OUT connector.

1080 1080P OFF480P 720P

Left side tray

Right side tray

NOTES:

• Video and audio signals may distorted temporarily

when switching to/from the HDMI output mode.

•

Use a display equipment with an HDMI-compatible port.

•

The HDMI indicator on the front panel flashes when you

select the HDMI output mode but there is no HDMI cable.

•You can check the HDMI connection status by pressing

the DISPLAY button during playback with the HDMI

output mode (refer to page 26).

• If the TV is not compatible with newly selected HDMI

output mode, the actual output mode will be kept the

one before changing the selection. When this occurs,

the newly selected mode will appear on the front panel

display (see page 11) while the actual output resolution

will be indicated by performing the on-screen display as

described on page 26.

Insert a Video CD.

Press the

STOP button.

Press the

Numeric buttons to enter the desired

Track number.

• PBC function is now canceled and the playback of the

Video CD will start.

To call back PBC function, press the STOP button

twice, and then press the

PLAY button.

• The title menu will appear on the TV screen.

VCD

CANCELING AND CALLING BACK PBC FUNCTION

E8735UD(EN).qx4 07.3.28 11:13 AM Page 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Comments to this Manuals

No comments

Denon DVM-745 Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for DVD players Denon DVM-745