Denon DN-C615 User Manual download pdf (Page 8)

ENGLISH

✽. This operation only works while the power is on.

1. Press the power operation switch q to turn on the power.

2. Press the OPEN/CLOSE button e.

OPENING AND CLOSING THE DISC HOLDER AND

LOADING A DISC

Opening and closing the disc holder

• Make sure the disc holder is completely open.

• Hold the disc by the edges and place it on the disc

tray. (Do not touch the signal surface, i.e., the

glossy side.)

• When using 12 cm. diameter discs, make sure the

outer edge matches the tray guide circumference

and when using CD signals (8 cm. diameter) match

the outer edge with the inner tray guide

circumference.

• Press the OPEN/CLOSE button e to close the disc

holder w.

• When the disc holder is open and a disc is loaded,

you may also press the PLAY (

1) button y to close

the disc holder. (If the PLAY (

1) button is pressed,

playback will start immediately upon the disc

contents having been read.)

How to load a disc

CAUTIONS:

• If you finger should get caught in the disc

holder when it closes, press the OPEN/CLOSE

button.

• Do not place any foreign objects on the disc

tray, and do not place more than one disc on the

tray at a time. Otherwise malfunction may

occur.

• Do not push in the disc tray manually when the

power is off as this may cause malfunction and

damage the CD player.

• This player can play CD-R/RW discs, but only if

they are finalized. Note however that depending

on the recording quality, the player may not be

able to play some finalized CD-R/RW discs.

NORMAL CD PLAYBACK

1. Press the power operation switch q to turn on the

power.

2. Load the disc you want to play.

3. Make the presettings according to the usage

purpose. (See page 13.)

• Select the play finish mode. (Preset functions)

Finish stop :

The stop mode (the servo functions turn off) is

set when playback finishes.

Finish next :

The standby mode is set at the beginning of the

next track when playback is finished.

✽ After the final track is played, the standby

mode is set at the beginning of the first track.

Finish recue :

When playback is finished, the standby mode is

set at the position at which playback was started.

• To standby at the point where the sound begins.

(Preset functions)

Set the “C Det” level.

When a track is selected, the position at which

the sound begins is found when a track is cued

and the standby mode is set at that point.

• Select the play mode. (Preset function)

SINGLE : (single track play mode)

The stop mode is set after the specified track is

played.

CONT. : (continuous play mode)

The stop mode is set after the last track is

played.

4. Press the PLAY (

1) button y.

(1) Starting playback

Playback can be temporarily halted and then continued

from the same point in the track.

1. Press the PAUSE (

3) button i during playback.

2. To continue playback, press the PLAY (

1) button y.

(2) Pausing playback at any point

(Pause)

1. Press the STOP (2) button u.

(3) Stopping playback

2 Messages

Messages may appear on the display while using the DN-C615. The meanings of these messages are

explained below.

Message Meaning

No Disc

No disc inserted, disc unreadable or disc inserted upside down.

TOC Error

The disc information has not been read properly.

Invalid CD

The disc is a CD-ROM that does not contain MP3 files.

Tray Error

The disc holder could not be opened or closed properly.

Auto Cue (Preset functions)

• Auto Cue is automatically cued to the point

where audio starts.

Cueing takes place at the point where audio

starts rather than where the track starts. The

level at which sound is first detected can be set

between –36 to –48 dB (3 steps).

End of Message (EOM) (Preset functions)

• At the end of the track, the time display flashes,

providing a visual warning to the operator that

the track will end shortly. The point at which the

flashing beings can be set within a range of 0 to

60 seconds (7 steps) prior to the end of the

track.

Sleep mode (Preset functions)

• The sleep mode is set if no operation is

performed for set-up time in the standby, pause

or manual search mode.

When in the sleep mode, if the PLAY/PAUSE

button is pressed, playback will be started from

the beginning of the track in which the sleep

mode was set. If the CUE button is pressed, it

will standby for the beginning of the track in

which the sleep mode was set.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 75 76

Comments to this Manuals

No comments

Denon DN-C615 User Manual Page 8

Comments to this Manuals

Related products and manuals for Players Denon DN-C615