Denon Envaya Mini Owner's Manual download pdf (Page 23)

No sound from the speaker

Symptom Cause / Solution Page

No sound from the speaker.

The speaker is not connected to USB to AC power adapter or the battery is not charged. Connect power

and turn on the speaker.

The volume is too low on your connected device. Turn up the volume on your device to about 90 % and

then adjust the volume on the speaker.

There is no connected Bluetooth device. Pair and connect a Bluetooth device and try again. 10

There is no connected AUX device. Connect an audio device to the AUX input using a stereo 3.5mm

cable and make sure music playing music on your device.

The AUX input connector of Envaya Mini is compatible with stereo mini plug cables that have 3-

conductor plugs. Be sure to use a 3-conductor stereo mini plug cable.

Sound is distorted, noisy, or cuts in and out

Symptom Cause / Solution Page

Sound is distorted, noisy, or

cuts in and out.

The volume is too low on your connected device. Turn up the volume on your device to about 90 % and

then adjust the volume on the speaker.

The Bluetooth device is out of range. Bring the Bluetooth device closer to the speaker. －

The Bluetooth connection is experiencing wireless interference. Move the speaker away from appliances

such as microwave ovens and other wireless devices.

－

The Bluetooth device is having connectivity issues. Cycle the power on the Bluetooth and reconnect to

the speaker.

－

Depending on the type of USB to AC power adapter connected to Envaya Mini, a small amount of noise

may occur during charging. This is not a malfunction.

－

Contents Preparation Connections

Operation

Troubleshooting

Appendix

Index

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 34 35

No comments

Denon Envaya Mini Owner's Manual Page 23