Denon 1905 - AVR AV Receiver Operations Instructions download pdf (Page 31)

ENGLISH

LISTENING TO THE RADIO

Auto preset memory

When the main unit’s power operation switch

turn on while pressing the set’s PRESET • (+)

button the unit automatically begins searching

for FM broadcast stations.

ON / STANDBY

ª•PRESET

When the first FM broadcast station is found,

that station is stored in the preset memory at

channel A1. Subsequent stations are automatically

stored in order at preset channels A1 to A8, B1

to B8, C1 to C8, D1 to D8, E1 to E8, F1 to F8

and G1 to G8, for a maximum of 56 stations.

Channel A1 is tuned in after the auto preset

memory operation is completed.

This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in

the preset memory.

The “Auto tuner preset” operation can also be performed at “System setup”. (See page 16.)

NOTES:

• If an FM station cannot be preset automatically due

to poor reception, use the “Manual tuning”

operation to tune in the station, then preset it using

the manual “Preset memory” operation.

• To interrupt this function, press the power operation

switch.

2 DEFAULT VALUE

AUTO TUNER PRESETS

A1 ~ A8 87.5/89.1/98.1/108.0/90.1/90.1/90.1/90.1 MHz

B1 ~ B8 522/603/999/1404/1611 kHz/90.1/90.1/90.1 MHz

C1 ~ C8 90.1 MHz

D1 ~ D8 90.1 MHz

E1 ~ E8 90.1 MHz

F1 ~ F8 90.1 MHz

G1 ~ G8 90.1 MHz

Auto tuning

2 41

Press the MODE button to set the auto tuning

mode.

Press the TUNING • (+) or ª (–) button.

• Automatic searching begins, then stops

when a station is tuned in.

Lit

ª TUNING •

NOTE:

• When in the auto tuning mode on the FM band, the

“STEREO” indicator lights on the display when a

stereo broadcast is tuned in. At open frequencies,

the noise is muted and the “TUNED” and

“STEREO” indicators turn off.

Manual tuning

Set the input function to “TUNER”.

Press the MODE button to set the manual

tuning mode.

Check that the display’s “AUTO” indicator

turns off.

Press the TUNING • (+) or ª (–) button to tune

in the desired station.

The frequency changes continuously when the

button is held in.

Watching the display, press the BAND button

to select the desired band (AM or FM).

NOTE:

• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO”

indicator turns off.

(Main unit)

Set the input source to “TUNER”.

Watching the display, press the BAND button

to select the desired band (AM or FM).

FUNCTION

BAND

(Main unit) (Remote control unit)

(Remote control unit)

(Main unit) (Remote control unit)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 122 123

Comments to this Manuals

No comments

Denon 1905 - AVR AV Receiver Operations Instructions Page 31

Comments to this Manuals

Related products and manuals for Receiver Denon 1905 - AVR AV Receiver