Denon AVR-1508 Owner's Manual download pdf (Page 27)



Getting Started Connections Playback Remote Control Information Troubleshooting

ENGLISH

A6 Crossover Frequency

Select crossover frequency from which subwoofer handles low

range signal.

[Display]

1 . S p 2 . I n 3 . O p

S p e a k e r S e t u p

1 6 C r . O v e r 8 0 H z

[Selectable items]

40Hz

60Hz

80Hz

90Hz

100Hz

110Hz

120Hz

150Hz

200Hz

250Hz

Only the portion of the bass sound of the various speakers output

from the subwoofer that has a frequency below the frequency set

here is output.

Set this according to the low frequency reproduction capabilities of the

speakers you are using.

• The “Crossover Frequency” can be set when there are speakers that

have been set to “Small” at “System Setup” – “Speaker Setup” or

when “Subwoofer” is set to “Yes” (vpage 22).

• For speakers set to “Small”, sound below the crossover frequency

is cut from the sound output. The cut bass sound is output from the

subwoofer or front speakers.

• Always set the crossover frequency to “80 Hz”. When using small

speakers, however, we recommend setting the crossover frequency

to a higher frequency.

A7 Test Tone

Adjust channel levels to obtain equal volume from all speakers.

[Display]

1 . S p 2 . I n 3 . O p

S p e a k e r S e t u p

1 7 T . T o n e Y e s <

T . T o n e A u t o >

T e s t T o n e O n

A u t o - F L

Test Tone

Select test tone playback method.

[Selectable items]

Auto

: Automatically switch speaker from which test tone is

output.

Manual

: Manually switch speaker from which test tone is output.

Test Tone Start

Press the o button to select “Yes”, then press the o p button to select

“Auto” or “Manual”.

Then press the i button. Out put the test tone.

Auto : Press the o p button to adjust the volume.

Manual : Press the u i button to select the speaker, then press the

o p button to adjust the volume.

When the adjustments are completed, press the ENTER button to

ﬁnish the test tone.

[Variable range]

–12dB

0dB

+12dB

• When “System Setup” – “Speaker Setup” – “Surround Back

Speaker” setting (vpage 22) is set to “1spkr”, the surround back

speaker display is set to “SB” .

• Speakers set to “None” in the Speaker Conﬁguration settings are not

displayed.

• When “Test Tone” is adjusted, the adjusted values are set for all

the surround modes. To adjust the channel level separately for the

different surround modes, use the operation see page 39.

Operating from the remote control unit

Adjusting with the remote control unit using the test tones is only

possible in the “Auto” mode and only effective in the STANDARD

mode. The adjusted levels for the different modes are automatically

stored in the memory.

GAdjusting using test tonesH

q Press the TEST button on the remote control unit.

Test tones are output from the various speakers.

w Use the o p button to adjust so that the volume is equal for all

speakers.

e When the adjustments are completed, press the TEST button on

the remote control unit again.

Setup

Operations (vpage 21)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Comments to this Manuals

No comments

Denon AVR-1508 Owner's Manual Page 27

Comments to this Manuals

Related products and manuals for Receiver Denon AVR-1508