Denon AVR-3808 Owner's Manual download pdf (Page 8)



GUI Menu Map Playback Information Troubleshooting

ENGLISH

Dynamic EQ

Audyssey Dynamic EQ™ solves the problem of deteriorating sound

quality as volume is decreased by taking into account human

perception and room acoustics. Audyssey Dynamic EQ works in

tandem with Audyssey MultEQ

XT to provide well-balanced sound

for every listener at any volume level.

[Selectable items]

: Use Dynamic EQ function.

OFF

: Do not use Dynamic EQ function.

Operating from the main remote control unit

Press [PARA].

Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF

Dynamic EQ / Volume : OFF

• “Dynamic EQ” can only be set when auto setup has been performed.

• After performing “Auto Setup”, the “Dynamic EQ” setting

automatically becomes “ON”.

• “Dynamic EQ” cannot be set in the following situations.

⋅ If “Auto Setup” fails to be completed.

⋅ After running Auto Setup, when the number of used speakers has

increased from the number of measured speakers.

• When “Room EQ” is set to “OFF” or “Manual”, “Dynamic EQ” is

automatically set to “OFF”.

• Before running Auto Setup and after running Auto Setup, if the

number of speakers has increased or you pressed [PARA], “Run

Audyssey” is displayed. In this case, either perform Auto Setup or

return to the setting after running Auto Setup with “Auto Setup”

– “Parameter Check” – “Restore”.

n Operating conditions for each function

• Dynamic EQ : When “Room EQ” is set to “Audyssey”,

“Audyssey Byp. L/R” or “Audyssey Flat”

• Dynamic Volume : When “Dynamic EQ” is set to “ON”

• Setting : When “Dynamic Volume” is set to “ON”

Room EQ

Dynamic EQ

Dynamic Volume

Setting

NOTE

When you set ”Dynamic EQ” to ”ON”, “Tone” and “Night Mode”

cannot be used.

Dynamic Volume

Audyssey Dynamic Volume™ solves the problem of large variations

in volume level between television programs, commercials, and

between the soft and loud passages of movies.

Audyssey Dynamic EQ is integrated into Dynamic Volume so that as

the playback volume is adjusted automatically, the perceived bass

response, tonal balance, surround impression, and dialog clarity

remain the same.

NOTE

“Dynamic Volume” and “Night Mode” cannot be used jointly.

[Selectable items]

: Use Dynamic Volume.

The Dynamic Volume effect will be at the level of the

“Setting”.

OFF

: Do not use Dynamic Volume.

• “Dynamic Volume” can only be set when auto setup has been

performed.

• “Dynamic Volume” cannot be set in the following situations.

⋅ If “Auto Setup” fails to be completed.

⋅ After running Auto Setup, when the number of used speakers has

increased from the number of measured speakers.

• When “Room EQ” is set to “OFF” or “Manual”, “Dynamic Volume”

is automatically set to “OFF”.

• Before running Auto Setup and after running Auto Setup, if the

number of speakers has increased or you pressed [PARA], “Run

Audyssey” is displayed. In this case, either perform Auto Setup or

return to the setting after running Auto Setup with “Auto Setup”

– “Parameter Check” – “Restore”.

Operating from the main remote control unit

Press [PARA].

Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF

Dynamic EQ / Volume : OFF

Setting

Can be set when “Dynamic Volume” is set to “ON”.

Set Dynamic Volume effect.

[Selectable items]

Midnight

: High setting affects volume the most, causing all sounds

to be of equal loudness.

Evening

: Middle setting prevents loud and soft sounds from

being much louder and softer respectively than average

sounds.

Day

: Low setting provides the least adjustments to the

loudest and softest of sounds.

NOTE

• “Setting” can only be set when auto setup has been performed.

• “Setting” cannot be set in the following situations.

⋅ If “Auto Setup” fails to be completed.

⋅ After running Auto Setup, when the number of used speakers has

increased from the number of measured speakers.

⋅ If “Dynamic Volume” setting is “OFF”.

About Dynamic Volume

Audyssey Dynamic Volume™ solves the problem of large variations

in volume level between television programs, commercials, and

between the soft and loud passages of movies.

Dynamic Volume looks at the preferred volume setting by the user and

then monitors how the volume of program material is being perceived

by listeners in real time to decide whether an adjustment is needed.

Whenever necessary, Dynamic Volume makes the necessary rapid

or gradual adjustments to maintain the desired playback volume

level while optimizing the dynamic range. Audyssey Dynamic EQ is

integrated into Dynamic Volume so that as the playback volume is

adjusted automatically, the perceived bass response, tonal balance,

surround impression, and dialog clarity remain the same whether

watching movies, ﬂipping between television channels, or changing

from stereo to surround sound content.

About Dynamic EQ

Audyssey Dynamic EQ™ solves the problem of deteriorating sound

quality as volume is decreased by taking into account human

perception and room acoustics. Dynamic EQ selects the correct

frequency response and surround levels moment-by-moment at

any user-selected volume setting. The result is bass response, tonal

balance, and surround impression that remain constant despite

changes in volume. Dynamic EQ combines information from

incoming source levels with actual output sound levels in the room,

a prerequisite for delivering a loudness correction solution. Audyssey

Dynamic EQ works in tandem with Audyssey MultEQ XT to provide

well-balanced sound for every listener at any volume level.

Setup

AVR4308ACI-3808ACI_E2A_2nd.indd 8 2008/08/25 10:13:33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Denon AVR-3808 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Receiver Denon AVR-3808