Denon DRA-697CI Operations Instructions download pdf (Page 13)

Connections Connections

ENGLISH

Connecting the power supply cord

AC 120 V, 60 Hz

AC outlet

(wall)

NOTE:

• Insert the plugs securely. Incomplete connections will result in the generation of noise.

• Only use the AC OUTLETS for audio equipment. Never use it for hair driers, monitors or other

electrical appliances.

AC OUTLETS

• SWITCHED (total capacity – 120 W (1 A))

The power to the outlet is turned on and off in

conjunction with the POWER switch on the

main unit, and when the power is switched

between on and standby from the remote

control unit.

No power is supplied from this outlet when

this unit’s power is at standby. Never connect

equipment whose total power consumption

exceeds 120 W (1 A).

ENGLISH

Connecting the AUDIO PRE OUT/MAIN IN terminals

OUT

Premain amplifier or

Power amplifier

(MAIN)

Connecting the TRIGGER OUT jacks

Turn the DC 12 V voltage on and off for the

individual functions.

Connecting the RS-232C terminal

This terminal is used for an external controller.

Perform the following operation before using an

external controller connected to the RS-232C

terminal:

1. Press the ON/STANDBY button on the main unit

and set the unit to the operating mode.

2. Perform the operation to turn off the power

from the external control.

3. Check that the product has been set to the

standby mode.

After checking the above, check the connections of

the external controller. Operation is possible.

Power supply cord

(Supplied)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Comments to this Manuals

No comments

Denon DRA-697CI Operations Instructions Page 13

Comments to this Manuals

Related products and manuals for Receiver Denon DRA-697CI