ENGLISH
Getting Started Connections Other Functions Troubleshooting SpecificationsSystem Functions
Playback
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
n Turning the Power Off (to the standby mode)
Press ON/STANDBY again.
NOTE
• Be sure to stop playback before turning the power off.
• Make sure that the disc tray is completely shut before turning off the
power.
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.
1
Turn the DCD-F107 power on.
(Press <ON/STANDBY>).
If no disc is loaded “NO DISC” is displayed.
When system connections (vpage 14) are made, turn on the
power of the DRA-F107 first, then turn on the DCD-F107’s power.
b
2
Press <DISC/USB> to set the playback media mode
to “DISC”.
3
Insert a disc (vpage 3).
Press <5> to open/close the disc tray.
The disc tray also closes when <1/3> or [CD 1/3] is
pressed.
•
•
The playback media mode setting remains in the memory, even when
the power is set to standby.
1
Turn the DCD-F107 power on.
(Press <ON/STANDBY>).
When system connections (vpage 14) are made, turn on the
power of the DRA-F107 first, then turn on the DCD-F107’s power.
b
2
Connect USB memory device or iPod connection
cable.
When the USB memory device or iPod is connected to the USB
port on the DCD-F107, the source media mode automatically
switches to “USB” and file playback begins.
<ON/STANDBY>
<
5
> <
1
/
3
>
<DISC/USB>
USB port
Preparations
Before Playing a Disc Before Playing a USB or an iPod
Playback
Disc tray
Downloaded From DvDPlayer-Manual.com Denon Manuals
Comments to this Manuals