Denon AVR-887 User Manual download pdf (Page 77)

ENGLISH

Specifications

¢ Audio section

• Power amplifier

Rated output: Front (A, B):

100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)

135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Center:

100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)

135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Surround:

100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)

135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Surround Back:

100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)

135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)

Dynamic power: 120 W x 2 ch (8 Ω/ohms)

170 W x 2 ch (4 Ω/ohms)

Output terminals: Front: A or B 06 ~ 16 Ω/ohms

A + B 12 ~ 16 Ω/ohms

Center, Surround, Surround. Back: 06 ~ 16 Ω/ohms

• Analog

Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms

Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)

S/N: 100 dB (IHF-A weighted) (DIRECT mode)

Distortion: 0.008 % (20 Hz ~ 20 kHz) (DIRECT mode)

Rated output: 1.2 V

• Phono equalizer (PHONO input — REC OUT)

Input sensitivity: 2.5 mV

RIAA deviation: ±1 dB (20 Hz to 20 kHz)

S/N: 74 dB (A weighting, with 5 mV input)

Rated output / Maximum output: 150 mV / 7 V

Distortion factor: 0.03 % (1 kHz, 3 V)

¢ Video section

• Standard video terminals

Input / output level and impedance: 1 Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB

• S-Video terminals

Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

C (color) signal — 0.286 Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB

• Color component video terminal

Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms

B/CB signal — 0.7 Vp-p, 75 Ω/ohms

R/CR signal — 0.7 Vp-p, 75 Ω/ohms

Frequency response: 5 Hz ~ 100 MHz — +0, –3 dB

¢ Tuner section [FM] [AM]

(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10

–15

Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz

Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV

50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)

STEREO 23 µV (38.5 dBf)

S/N (IHF-A): MONO 77 dB (IHF-A weighted)

STEREO 72 dB (IHF-A weighted)

Total Harmonic Distortion (at 1 kHz): MONO 0.15 %

STEREO 0.3 %

¢ General

Power supply: AC 120 V, 60 Hz

Power consumption: 5.5 A

1 W Max (Standby)

Maximum external dimensions: 434 (W) x 171 (H) x 417 (D) mm (17-3/32” x 6-47/64” x 16-27/64”)

Mass: 13 kg (28 lbs 11 oz)

¢ Remote control unit (RC-1043)

Batteries: R6P/AA Type (Two batteries)

External dimensions: 52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)

Mass: 175 g (Approx. 6.2 oz) (included batteries)

* For purposes of improvement, specifications and design are subject to change without notice.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82

Comments to this Manuals

No comments

Denon AVR-887 User Manual Page 77

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-887