Denon PMA-2000IVR User Manual download pdf (Page 2)

PMA-2000

SPECIFICATIONS



 POWER AMPLIFIER SECTION

Rated Output Power:

Both channel driven

(8 Ω/ohms Load) 80 W + 80 W

20 Hz to 20kHz, T.H.D. 0.07 %

(4 Ω/ohms Load) 160 W + 160 W

DIN, 1 kHz, T.H.D. 0.7 %

Total Harmonic Distortion: 0.01 %

(−3 dB at rated output, 8 Ω/ohms) (1kHz)

Input Sensitivity/Input Impedance:

P. DIRECT: 0.9 V/47 kΩ/kohms

Amplification factor: 29 dB



 PRE AMPLIFIER SECTION

PHONO EQUALIZER

Rated Output: 150 mV

(Rec out Terminal)

Input Sensitivity/Input Impedance:

The value in parentheses ( ) refers to the input impedance when SOURCE DIRECT is ON.

PHONO: MM: 2.5 mV/47 kΩ/ohms

MC: 200 µV/100 Ω/ohms

CD, TUNER, DVD/AUX-1, AUX-2, 135 mV/47 kΩ/ohms

TAPE-1/CD-R, TAPE-2/MD: (135 mV/12 kΩ/ohms)

RIAA Deviation:

PHONO: 20 HZ ~ 20 kHz ±0.5 dB

Maximum Input: PHONO

MM: 130 mV/1 kHz

MC: 10mV/1 kHz

Rated Output: PRE PUT: 0.9 V

(Input CD 135 mV)



 OVERALL CHARACTERISTICS

SN Ratio (IHF A Network): PHONO

(input terminals short-circuited) MM: 89 dB (at 5 mV input)

(input terminals short-circuited) MC: 74 dB (at 0.5 mV input)

SOURCE-DIRECT: ON CD, TUNER, DVD/AUX-1, AUX-2, TAPE-1/CD-R, TAPE-2/MD: 108 dB

Tone Control Adjustable Range:

BASS: 100 Hz ±8 dB

TREBLE: 10 kHz ±8 dB



 OTHERS

Power Supply: AC 230 V, 50 Hz (Asia)

AC220 V, 50 Hz (China)

AC Outlets:

Switched × 2: 100 W (Total)

}

Except for China model

Unswitched × 1: 100 W

Power Consumption: 310 W (IEC)

Dimensions: 434 (W) × 180 (H) × 478 (D) mm (17-3/32" × 7-5/64" × 18-13/16")

Net Mass: 24.0 kg (52 lbs 14.6 oz)



 REMOTE CONTROL UNIT (RC-858)

Remote control system: Infrared pulse system

Power supply: 3 V DC, Two size R03 ("AAA") dry cell batteries

External dimensions: 56 (W) × 105 (H) × 19 (D) mm (2-3/16" × 4-1/8" × 23/32")

Mass: 70 g (Approx. 2.47 oz) (including batteries)

* Maximum dimensions include controls, jacks, and covers.

(W) = width, (H) = height, (D) = depth

* For improvement purposes, specifications and functions are subject to change without advanced notice.

SAFETY PRECAUTIONS

The following check should be performed for the continued protection of the customer and service technician.

LEAKAGE CURRENT CHECK

Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis

resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the

power cord is less than 460 kohms, the unit is defective.

1 2 3 4 5 6 7 ... 34 35

Comments to this Manuals

No comments

Denon PMA-2000IVR User Manual Page 2

Comments to this Manuals

Related products and manuals for Audio amplifiers Denon PMA-2000IVR