Denon 2310CI - AVR AV Receiver Owner's Manual Page 15
- Page / 78
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
2
Getting Started
Playback Remote Control Information Troubleshooting
Specifications
ENGLISH
Multi-ZoneSettings
Protection circuit
If the core wires touch the rear panel and the screws
etc., or the ± sides touch each other, the protection
circuit will be activated and the power indicator will
flash red at intervals of 0.5 secs.
If the protection circuit is activated, the speaker
output is isolated, and the power supply goes to
the standby state. If the power supply is turned off,
after the power supply cord is withdrawn, please
confirm that speaker cable and input cable are
connected.
Also, if replaying large sound levels by using
a speaker having an impedance less than that
specified (eg, 4 Ω/ohms), the temperature will rise,
and the protection circuit might be activated. The
power supply will go into the standby state, and the
power indicator will flash red at 2 second intervals.
In this case, please switch off the power supply, and
wait until the AVR-2310CI has cooled down, and the
surrounding ventilation is good.
Even if there are no problems with the surrounding
ventilation and connections, in the event of the
protection circuit becoming activated, due to
thinking that the AVR-2310CI has failed, please
contact DENON Service center after switching off.
w q
w q w q
*/
(L) (R)
w qw q
(R) (L)
w qw q
(R) (L)
Subwoofer with
built-in amplifier
Center
speaker
Surround
speakers
Front speakers
A
Front speakers
B
For connections of the SURR. BACK/AMP
ASSIGN speaker terminals, see “Amp Assign”
(vpage 28).
Connecting the Speakers
s
Set the “Amp Assign” Mode According to the Speaker Layout
The signals output from the AVR-2310CI’s SURR. BACK/AMP ASSIGN speaker terminals can be
switched to signals of the surround mode being used (vpage 28 “Amp Assign”).
Amp assign mode
(vpage 28)
SURR. BACK/AMP ASSIGN
Speaker connections
Example of speaker installation
Normal
Normal
Normal
Front Height
Front A Bi-Amp
or
Front B Bi-Amp
ZONE2
(Default)
MAIN ZONE ZONE2
Front Height
speakers
Surround back
speakers
Surround back
speakers
Not connected
Front A or B
speakers
b For connections, see
“About bi-amp connections”
(vpage 13).
(7.1)
(6.1)
(5.1)
(7.1)
(5.1)
(5.1)
(2)
b Connect to the “L” speaker
terminal.
b Set “S.Back” (vpage 29)
to “1spkr”.
b
Set the “S.Back” setting
(vpage 29) to “None”.
Installing/Setting the Speakers
ZONE2
speakers
Connections
- AVR-2310CI 1
- IMPOTANT SAFETY 2
- INSTRUCTIONS 2
- ENGLISHFRANCAIS 3
- Contents 4
- Cautions on Handling 6
- Cautions on Installation 6
- About the Remote Control Unit 6
- Part Names and Functions 7
- Rear Panel 9
- Remote Control Unit 10
- Specifications 11
- Multi-ZoneSettings 11
- Getting Started 11
- Connections 12
- (Video Conversion Function) 13
- When 5.1ch Connectedn 14
- Installing All the Speakers 14
- When 6.1ch Connectedn 14
- Connecting the Speakers 15
- (R) (L) 16
- Connecting Devices not 17
- Equipped with HDMI terminals 17
- Playback Components 18
- Recording Components 19
- SAT/CABLE Tuner 20
- Other Devices 20
- "69 22
- Once Connections are 23
- Completed 23
- Settings 24
- (Audyssey Auto Setup) 26
- SpecificationsMulti-Zone 27
- See overleaf 28
- Check Audyssey Auto Setup 30
- Setting contents 31
- Speaker Confi g 31
- Multi-Zone 32
- Specifi cations 35
- Decoding mode (Input Mode) 42
- (Antenna Aiming) 44
- Playback 45
- Programs 47
- S R 00 0 S i ri u s I D 48
- * * ** * * * * ** * * 48
- S R 00 1 H i ts 1 48
- C A T : P op s 48
- Selecting the Surround Mode 49
- Surround Mode 50
- (Audio/Video Adjust) 51
- Settings (Audyssey Settings) 53
- Equalizer (Manual EQ) 54
- Checking the Status 56
- (Information) 56
- Convenient functions 57
- Adjust the Volume of the 58
- Different Speakers 58
- (Quick Select Function) 58
- Various Memory Functions 58
- "69 59
- Main Remote Control Unit 60
- (RC-1117) 60
- Blu-ray Disc / DVD Player 61
- Operate Other Devices 62
- (Punch Through Function) 62
- Other Information 63
- DTS Surround 64
- Audyssey 64
- Surround Modes and Parameters 65
- Surround 66
- Troubleshooting 70
- MENU button 71
- DEVICE SELECT : TV 74
- DEVICE SELECT : DVD/HDP 75
- DEVICE SELECT : DVR/VCR 75
- DEVICE SELECT : SAT/CBL 76
- DEVICE SELECT : CD 77
- D&M Holdings Inc 78
Related products and manuals for AV receivers Denon 2310CI - AVR AV Receiver
(72 pages)
© 2020, manymanuals.com. All rights reserved. | 0.274 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals