Denon AVR 1906 - AV Receiver Operations Instructions download pdf (Page 39)

ENGLISH

Advanced Setup – Part 1 Advanced Setup – Part 1

ENGLISH

• The OPTICAL 2 terminal on the AVR-1906’s rear panel is

equipped with an optical digital output terminal for recording

digital signals on a CD recorder, MD recorder or other digital

recorder. Use this for digital recording between a digital audio

source (stereo – 2 channels) and a digital audio recorder.

• Do not connect the output of the component connected to the

OPTICAL 2 OUT terminal on the AVR-1906’s rear panel to any

terminal other than the OPTICAL 2 IN terminal.

• “TUNER” and “V. AUX” cannot be selected with “Digital In

Assign.”.

Press the CURSOR

button to select

“Digital In Assign.”, then press the ENTER

button.

• The “Digital In Assign.” screen appears.

Press the CURSOR

button to select the

digital input terminal, then press the CURSOR

button to select the input source.

Select “OFF” for input sources for which no digital input

terminals are used.

If “Yes” is selected for “Default”, the settings are

automatically reset to the default values.

Press the ENTER button to enter the setting.

• The “Input Setup” menu appears.

This setting assigns the digital input terminals of the AVR-1906

for the different input sources.

Input Setup

Setting the Digital In Assign.

Press the CURSOR

button to select

“Input Setup” at the “System Setup” menu,

then press the ENTER button.

• The “Input Setup” menu appears.

Set the method of playback of the analog input signal connected

to the Ext. In Subwoofer.

Setting the Ext In SW Level

Press the CURSOR

button to select “Ext

In SW Level” at the “Input Setup” menu, then

press the ENTER button.

• The “Ext In SW Level” screen appears.

Press the CURSOR

button to select

according to the specifications of the player

being used.

Also refer to the player’s operating instructions.

+15 dB (default) recommended (0, +5, +10 or +15 can be

selected).

Press the ENTER button to enter the setting.

• The “Input Setup” menu appears.

•Correct the playback level of the different input sources.

• Adjust the playback levels of the devices connected to the

different input sources to the same level to eliminate the need

for adjusting the main volume each time the input source is

switched.

Setting the Input Function Level

Press the CURSOR

button to select

“Input Function Level” at the “Input Setup”

menu, then press the ENTER button.

• The “Input Function Level” screen appears.

Press the CURSOR

button to select the

input source, then press the CURSOR

button to adjust the level.

The level can be adjusted between –12 dB and +12 dB in

units of 1 dB.

If “Yes” is selected for “Default”, the settings are

automatically reset to the default values.

Press the ENTER button to enter the setting.

• The “Input Setup” menu appears.

• After completing this setting, check that the playback levels for

the different sources are the same.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 109 110

Comments to this Manuals

No comments

Denon AVR 1906 - AV Receiver Operations Instructions Page 39

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR 1906 - AV Receiver