Denon AVR 1909 - AV Receiver Owner's Manual download pdf (Page 67)

Input Source Volume

Quick Select 1

DVD

-40

Quick Select 2 TV/CBl

-40

Quick Select 3

VCR

-40

Quick Select Function

With this function, the currently playing input source, input mode,

surround mode, MultEQ settings and volume

can

be stored in the

memory.

Set the input source, surround mode, MuItEQ,

Dynamic EQ, Dynamic Volume, Front Speaker

settings and volume to the conditions you want to

store.

Press and hold the desired

QUICK

SELECT

"Memory" appears

the display.

The current settings will

memorized.

[Quick Select Defaults]

until

Last Function

Memory

This stores the settings

they were directly before the standby

mode was set.

When the power is turned back

on,

the settings

are

restored to

they were directly before the standby mode was set.

Backup

Memory

The various settings

are

backed

for about 1 week, even if the

power

turned off or the power cord

disconnected.

Resetting

the

Microprocessor

Perform this procedure if the display

abnormal or if operations

cannot

performed.

When the microprocessor

reset,

all

the settings

are

reset to

their default values.

1Turn

ofT

the power using

<POWER>.

ENGLISH

•

call

out the settings, press

aUiCK

SELECT

at which the desired

settings were stored.

• The Quick Select name

can

changed (iGf'page

36).

.N.h.

Input sources stored

with

the quick select function cannot

selected

if they have been deleted

menu"

Manual Setup" - "Option Setup" -

"Source Delete" (iGf'page

36).

this

case,

store them again.

Personal

Memory

Plus Function

This function sets the settings (input mode, surround mode, H

output mode, MultEQ, Dynamic

EQ,

DynamicVolume, audio delay

etc.) last selected for the individual input sources.

When you switch to

input source, the settings

are

automatically

set to the ones that were set the last time that input source was

used.

The

surround parameters, tone settings

and

the volumes of the

different speakers are stored for the individual surround modes.

Press

<POWER>

while simultaneously pressing

<INPUT

MODE>

and

<SPEAKERS>.

Once the display starts flashing at intervals

about 1

second, release the two buttons.

step 3 the display does not flash at intervals of about 1 second,

start over from step

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 102 103

Comments to this Manuals

No comments

Denon AVR 1909 - AV Receiver Owner's Manual Page 67

Comments to this Manuals

Related products and manuals for Receiver Denon AVR 1909 - AV Receiver