Denon AVR-3805 User Manual Page 96
- Page / 104
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
96
The sampling frequency, number of bits and number of channels used for recording of music, etc., in studios has been increasing in recent years,
and there are a growing number of high quality signal sources, including 96 kHz/24 bit 5.1-channel sources.
For example, there are high picture/sound quality DVD video sources with 96 kHz/24 bit stereo PCM audio tracks.
However, because the data rate for these audio tracks is extremely high, there are limits to recording them on two channels only, and since the
quality of the pictures must be restricted it is common to only include still pictures.
In addition, 96 kHz/24 bit 5.1-channel surround is possible with DVD audio sources, but DVD audio players are required to play them with this high
quality.
DTS 96/24 is a multi-channel digital signal format developed by Digital Theater Systems Inc. in order to deal with this situation.
Conventional surround formats used sampling frequencies of 48 or 44.1 kHz, so 20 kHz was about the maximum playback signal frequency. With
DTS 96/24, the sampling frequency is increased to 96 or 88.2 kHz to achieve a wide frequency range of over 40 kHz.
In addition, DTS 96/24 has a resolution of 24 bits, resulting in the same frequency band and dynamic range as 96 kHz/24 bit PCM.
As with conventional DTS Surround, DTS 96/24 is compatible with a maximum of 5.1 channels, so sources recorded using DTS 96/24 can be
played in high sampling frequency, multiple channel audio with such normal media as DVD videos and CDs.
Thus, with DTS 96/24, the same 96 kHz/24 bit multi-channel surround sound as with DVD-Audio can be achieved while viewing DVD-Video images
on a conventional DVD-Video player ( 1). Furthermore, with DTS 96/24 compatible CDs, 88.2 kHz/24 bit multi-channel surround can be achieved
using normal CD/LD players ( 1).
Even with the high quality multi-channel signals, the recording time is the same as with conventional DTS surround sources.
What’s more, DTS 96/24 is fully compatible with the conventional DTS surround format, so DTS 96/24 signal sources can be played with a
sampling frequency of 48 kHz or 44.1 kHz on conventional DTS or DTS-ES surround decoders ( 2).
1: A DVD player with DTS digital output capabilities (for CD/LD players, a player with digital outputs for conventional DTS CDs/LDs) and a
disc recorded in DTS 96/24 are required.
2: The resolution is 24 or 20 bits, depending on the decoder.
DTS 96/24
HDCD
®
(High Definition Compatible Digital
®
)
HDCD is an encoding/decoding technology that greatly reduces the distortion that occurs upon digital recording while maintaining compatibility
with the conventional CD format, thus expanding the dynamic range and achieving a high resolution.
Conventional CDs and HDCD compatible CDs are identified automatically to select the optimum digital processing.
•
®
, HDCD
®
, High Definition Compatible Digital
®
and Microsoft
®
are either registered trademarks or trademarks of
Microsoft Corporation, Inc. in the United States and/or other countries. HDCD system manufactured under license from
Microsoft Corporation, Inc. This product is covered by one or more of the following: In the USA: 5,479,168, 5,638,074,
5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531, and in Australia: 669114. Other patents pending.
DENON LINK (DENON Digital Link)
High-grade LPCM 24-bit, 96-kHz, 6-channel or 24-bit, 192-kHz, 2-channel
(*3)
digital input is possible when the AVR-3805 is connected via a shielded
twisted pair (STP) cable to a Denon DVD player that supports Denon Digital Link, Since Denon Digital Link uses low-voltage differential signaling
(LVDS), transfer capabilities of greater than 1.2 Gbps at a differential voltage of approximately 0.3Vpp are possible.
AL24 Plus (AL24 Processing Plus)
2 AL24 Processing for All Channels
Denon has further developed its proprietary AL24 Processing, an analog waveform reproduction technology, to support the 192-kHz sampling
frequency of DVD-Audio. AL24 Processing Plus, thoroughly suppresses quantization noise associated with D/A conversion of LPCM signals to
reproduce the low-level signals with optimum clarity that will bring out all the delicate nuances of the music.
Equipped foe not only front left and right channels but also for the surround left and right, center and subwoofer channels.
- AVR-3805 1
- CAUTION: 2
- ATTENTION 2
- WARNING: 2
- SAFETY INSTRUCTIONS 3
- TABLE OF CONTENTS 4
- BEFORE USING 4
- CAUTIONS ON INSTALLATION 4
- CAUTIONS ON HANDLING 5
- FEATURES 5
- R) inputs 6
- CONNECTIONS 7
- (S-Video jack) 10
- (Color Diffrence Video jack) 10
- (Video jack) (Video jack) 10
- INFRARED SENSOR 12
- RETRANSMITTER 13
- Power amplifier 13
- INFRARED 13
- DENON LINK connections 14
- Speaker system connections 15
- Protector circuit 16
- Note on speaker impedance 16
- PART NAMES AND FUNCTIONS 17
- Front Panel 17
- Remote control unit 19
- SETTING UP THE SYSTEM 20
- Auto Set/RoomEQ 22
- *System Setup 22
- Auto setup/Room EQ 23
- 1-1 Setting the Auto Setup 24
- About automatic retry 25
- About the error message 25
- Sp Config.Check 26
- *Auto Setup 26
- 1-3 Setting the Room EQ Setup 28
- 1-4 Setting the Direct Mode 29
- 1-6 Check the EQ parameter 30
- Setting the Speaker Setup 31
- Setting the type of speakers 32
- Setting the Delay Time 33
- Setting the Channel Level 34
- FL C FR SR SBR SBL SL SW 35
- Crossover Freq 36
- *Speaker Setup 36
- 80Hz 36
- *Crossover Freq 36
- Subwoofer Mode 37
- LFE 37
- *Subwoofer Mode 37
- Setting the Input Setup 38
- Digital In 39
- *Input Setup 39
- CD : COAX1 39
- *Digital In 39
- COMPONENT 41
- Svideo Video 41
- Auto Tuner Presets 42
- Setting the Advanced Playback 43
- 4-1 Setting the Audio Delay 43
- Setting the Option Setup 44
- Setting the Trigger Out Setup 46
- 5-5 Setting the Muting Level 47
- 5-7 Protecting the setting 48
- After completing system setup 49
- (Main unit) 49
- (Remote control unit) 49
- REMOTE CONTROL UNIT 50
- 6, 7 : Manual search 51
- 2 : Stop 51
- 8, 9 : Auto search 51
- 3 : Pause 51
- Preset memory 53
- Learning function 56
- System call 57
- Punch Through 58
- Setting the brightness 59
- Resetting 60
- OPERATION 62
- Playing the input source 63
- MASTER VOLUME 64
- After starting playback 67
- SURROUND A SURROUND B 68
- SURROUND A+B 68
- MULTI ZONE 69
- MAIN ZONE 5.1-channel systems 70
- ZONE 2 ZONE 3 70
- ZONE2 SOURCE 71
- FUNCTION 71
- SURROUND 72
- Dolby Pro Logic 73
- DTS NEO:6 mode 75
- 5, 612 34 76
- Checking the input signal 77
- Adjusting the Audio Delay 78
- *Advanced Play 79
- Audio Delay 79
- DSP SURROUND SIMULATION 80
- DSP surround simulation 81
- Tone control setting 82
- Surround parameters e 83
- Surround modes and parameters 83
- LISTENING TO THE RADIO 85
- Checking the preset stations 86
- LAST FUNCTION MEMORY 87
- TROUBLESHOOTING 88
- ADDITIONAL INFORMATION 89
- Surround back speakers 90
- Speaker setting examples 91
- Surround 93
- DTS Digital Surround 94
- DTS-ES Extended Surround 95
- INPUT MODE settings 100
- SPECIFICATIONS 101
- Telephone: (03) 3837-5321 104
Related products and manuals for Receivers and Amplifiers Denon AVR-3805
(18 pages)
(168 pages)
(90 pages)© 2020, manymanuals.com. All rights reserved. | 0.695 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals