Denon DHT-S514 Specifications download pdf (Page 14)

Bluetooth connection problems

• If a Bluetooth fault occurs (the device moves out of range, or stops playing due to low battery or user input), DHT-S514’s Bluetooth LED

again blinks rapidly; the DHT-S514 will automatically attempt to re-connect, and will resume playback when the Bluetooth source is in

range. Note: On some devices you will need to press play again. Bluetooth’s eﬀective wireless range varies with the source; (9 – 12 m) is

typical. If the source moves out of range, DHT-S514 will continue trying to re-connect it for 4 minutes; after that interval you will have to

re-connect, as above.

• Make sure DHT-S514 is not paired to a diﬀerent Bluetooth source device.

• Make sure your desired Bluetooth source device is actually playing music or another audio program and is paired to DHT-S514 and not

some other device.

• On a multifunction source device such as a tablet or mobile phone, not every program or “app” may support Bluetooth audio broadcast

(consult the instructions for the program or app).

• Consider possible sources of interference, particularly those operating at 2.4 GHz (Wi-Fi routers, microwave ovens, landline cordless

telephones); power down suspects one at a time to identify a culprit. Often, repositioning an interfering device to another room, or even

across the room, will restore Bluetooth function.

DHT-S514 takes several seconds to turn on

• The DHT-S514’s power saving design puts the unit into standby mode after ﬁve minutes of no sound. DHT-S514 takes a few seconds to start

up the next time audio plays.

Factory reset

• Unplug sound bar from wall.

• Hold down Vol – (minus) button.

• Plug into power again.

• Standby button light will blink fast for several seconds indicating that the system has been reset.

• Clears Bluetooth pairing, remote learning, audio mode.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 41 42

No comments

Denon DHT-S514 Specifications Page 14