Denon Professional DN-V755 User Manual download pdf (Page 2)

Distributed by : Page 2 of 4 V1.00

Kingsbridge House, Padbury Oaks Tel: +44 1753 680023

575-583 Bath Road, Longford Fax: +44 1753 686020

Middlesex UB7 0EH Email: s[email protected]

United Kingdom

Power requirements

The DNVP-MTC is powered from

the parallel port +5V line of the con-

nected DN-V755 player. The maxi-

mum current draw is 10mA.

DNVP-MTC interface

The DNVP-MTC interface connec-

tion is a standard DB15 male as

specified within the V755 player

specification.

All IO is TTL/CMOS compatible.

DNVP-MTC interface

Function DB15 Male

Trigger 1 1

Trigger 2 2

Trigger 3 3

Trigger 4 4

Trigger 5 5

Trigger 6 6

Ground 9

AUX 1 13

+5V 15

All other connection are N/C

Touchscreen interface

The touchscreen connection is a

standard DB9 male RS232 port.

Serial communication protocol is

9600 Baud, 1 Start bit, 8 Data bits, 1

Stop bit, No parity. All I/O is RS232

compatible.

Touchscreen interface

Function DB9M pin

RXD 2

TXD 3

RTS 7

CTS 8

Ground 5

All other connections are NC

Touchscreen compatibility

The DNVP-MTC is fully compatible

with any RS232 (serial) Mi-

crotouch

(3M

) touchscreen con-

troller supporting ‘Format Table’

packets, such as the Microtouch

MT410

, 3M

SC400

controller.

NOTE: The DNVP-MTC does not

interface directly with the touch-

screen itself !

Calibration

There are three simple steps to cali-

brate the touchscreen to image size:

1. Ensure there is a stable image on

the screen and press the yellow but-

ton located on the bottom of the

DNVP-MTC. The LED indicator,

located under the top label, should

flash twice.

If no flashing is seen double check

that the touchscreen controller and

player are powered and that the

touchscreen is connected to the con-

troller.

2. Firmly touch the touchscreen

within the BOTTOM LEFT hand

corner of the image displayed. The

LED indicator should flash twice.

If the LED indicator flashes more

than twice then the touch on the

screen was insufficient and calibra-

tion has been aborted.

3. Firmly touch the touchscreen

within the TOP RIGHT hand corner

of the image displayed. The LED

indicator should flash twice.

If the LED indicator flashes more

than twice then the touch on the

screen was insufficient and calibra-

tion has been aborted.

The touchscreen is now calibrated.

Operation

As touches are made within the trig-

ger zones, see sample master playlist

graphic below, the relevant triggers

1-6 are activated on the DN-V755

player. The LED indicator will flash

on every touch down.

Playlist production

When producing the playlists to be used

with the DNVP-MTC the following

procedure should be used:

1. Under the ‘PLAYLISTS AND

MEDIA’ tab select the ‘Create

New Playlist’ option.

2. Select the ‘Simple Playlist’ button.

3. Under ‘Media browser’ on the left

of the page ensure the ‘All’ icon is

selected so that all media can be

seen.

4. Select the video/picture you wish

to loop until the screen is touched,

see sample graphic below.

5. Ensure the ‘Loop’ checkbox is

checked.

6. Select the ‘Save’ option and enter a

playlist name eg. ‘DNVP-MTC

master’ and click ‘OK’.

7. Under the ‘PLAYLISTS AND

MEDIA’ tab select the ‘Create

New Playlist’ option.

8. Select the ‘Interactive Playlist’

button.

9. In the ‘Trigger 1’ window select

the ‘ADD media here’ line.

10. Select the video/audio/pictures you

wish to be played back from the

media browser when the trigger 1

zone of the screen is touched.

Note: The video/audio should have

been placed in the ‘Content’ direc-

tory of the DN-V755 player.

11. Ensure the ‘Loop’ checkbox is

NOT checked.

12. Repeat 9 - 11 above for the remain-

ing trigger inputs 2-6.

Note: Not all trigger inputs need to

be used ie. 2 & 5 could just be used

for two zone support.

13. Select the master playlist, ie.

‘DNVP-MTC master’, to be re-

turned to after trigger playlist com-

pletion at the bottom of the screen.

14. Select the ‘Save’ option and enter a

playlist name eg. ‘DNVP-MTC

content’ and click ‘OK’.

See below for DN-V755 sample

browser windows.

To download sample playlists for this product

please go to: www.designersystems.co.uk

and select ‘Network Video Player Products’

‘NVP touchscreen controllers’ ‘DNVP-

MTC’.

1 2 3 4

Comments to this Manuals

No comments

Denon Professional DN-V755 User Manual Page 2

Comments to this Manuals

Related products and manuals for Unknown Denon Professional DN-V755