Denon AVR-3806 User Manual download pdf (Page 28)

Connecting Other Sources Connecting Other Sources

Connecting the XM terminal

• AVR-3806 is the XM Ready® receiver. You can receive XM Satellite Radio® by connecting to the

XM Connect-and-Play

(sold separately) and subscribing the XM service.

• Plug the XM Connect-and-Play antenna into XM terminal on the rear panel.

• Position the XM Connect-and-Play antenna near a south-facing window to receive the best signal.

For details, see “XM Satellite Radio” ( page 45).

When making connections, also refer to the operating instructions of the XM Connect-and-Play

antenna.

NOTE:

• Keep the power supply cord unplugged until the XM Connect-and-Play antenna connection

have been completed.

Connecting the CONTROL terminal

This terminal is used for an external

controller.

Perform the following operation

before using an external controller

connected to the RS-232C terminal:

1. Press the ON/STANDBY switch

on the main unit and set the unit

to the operating mode.

2. Perform the operation to turn off

the power from the external

control.

3. Check that the product has been

set to the standby mode.

After checking the above, check the

connections of the external

controller. Operation is possible.

Connecting the TRIGGER OUT terminals

Turn the DC 12V voltage on and off

for the individual functions and

surround modes.

For details, see “Setting the Trigger

Out” ( page 73).

XM Connect-and

-Play Antenna

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 141 142

No comments

Denon AVR-3806 User Manual Page 28