Denon S-101 User Manual download pdf (Page 52)

ENGLISH

System Setup System Setup

ENGLISH

Press the CURSOR

•

button to select

“DISTANCE”, then press the ENTER button.

• The distance setting screen appears.

Press the CURSOR 0 or 1 button to select

“FEET” or “METERS” for the “DISTANCE”

mode, then press the CURSOR

button.

Press the CURSOR

•

button to select the

speaker, then press the CURSOR 0 or 1 button

to set the distance between the speaker and the

listening position.

• The distance changes by 1 foot (or 0.1 meters when the

unit is set to feet) each time the CURSOR

button

is pressed. Select the value closest to the measured

distance.

Make sure the difference in the distances set for the

various speakers is no greater than 15 feet (4.5 meters).

If an inappropriate distance is set, “CAUTION: INVALID

DISTANCE” is displayed. Change the position of the

speaker and make the setting over.

To set the distance of the various speakers back to their

default values, press the CURSOR

•

button to select

“DEFAULT” then press the ENTER button.

Setting “SPEAKER LOCATION”

The optimum acoustics can be achieved by setting the location

of the speakers and the conditions in the room.

Press the CURSOR

•

button to select

“SPEAKER SETUP” at the “AUDIO SETUP”,

then press the ENTER button.

• The “SPEAKER SETUP” screen appears.

Press the CURSOR

•

button to select

“SPEAKER LOCATION”, then press the

ENTER button.

• The speaker locations setting screen appears.

LOCATION:

Select the speaker setting location.

ROOM DAMPING:

Select the reverberation of the sound in the room in which the

speakers are located.

Press the CURSOR 0 or 1 button to select “1”,

“2” or “3” for the “LOCATION” mode, then

press the CURSOR

button.

•The “SPEAKER SETUP” screen appears.

1 (ON WALL):

Select this when satellite speakers are installed on the walls

or when there is a wall directly behind the speakers.

2 (ON SHELF) (Factory default):

Select this when the speakers are installed on a table or rack

using the included speaker stands.

3 (FREE STANDING):

Select this when a separately sold floor stand is installed.

Select “ON WALL” when there is a wall directly behind the

speakers, regardless of the “ON SHELF” or “FREE

STANDING” setting.

Press the CURSOR

button to select “SETUP

MENU”, then press the ENTER button.

• The “SPEAKER SETUP” screen appears.

Press the CURSOR

button to select “NEXT

SETUP MENU”, then press the ENTER to enter

the setting.

• The next screen in the “SETUP” menu screen appears.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 137 138

Comments to this Manuals

No comments

Denon S-101 User Manual Page 52

Comments to this Manuals

Related products and manuals for Acoustics Denon S-101