Denon AVP-A1HD Owner's Manual download pdf (Page 26)



Getting Started Connections Other Operations Multi-Zone Information Troubleshooting SpeciﬁcationsPlaybackSetup

Operating from the main remote control unit

Adjusting with the main remote control unit using the test tones is

only possible in the “Auto” mode and only effective in the STANDARD

(Dolby/DTS Surround) and HOME THX CINEMA modes. The adjusted

levels for the different modes are automatically stored in the

memory.

GAdjusting using test tonesH

q Press the TEST button.

Test tones are output from the various speakers.

w Use the o p button to adjust so that the volume is equal for all

speakers.

e When the adjustments are completed, press the TEST button

again.

• The level of each channel should be adjusted to 75 dB (Cweighted,

slow meter mode) on a sound level meter at the listening position. If

a sound level meter is not available adjust the channels by ear so the

sound levels are the same. Because adjusting the subwoofer level

test tone by ear is difﬁcult, use a well known music selection and

adjust for natural balance.

• Speakers set to “None” in the “Speaker Conﬁguration” settings are

not displayed.

• When “Channel Level” is adjusted, the adjusted values are set for

all the surround modes. To adjust the channel level separately for

the different surround modes, use the operation see C page 74

AVR-5308CI

, C page 75

AVP-A1HDCI

Default

Resets the settings to the default values.

g Crossover Frequency

Select crossover frequency from which subwoofer handles low

range signal.

[Selectable items]

FIXED–THX–

Setup when using a THX-certiﬁed speaker.

40Hz

60Hz

80Hz

90Hz

100Hz

110Hz

120Hz

150Hz

200Hz

250Hz

Only the portion of the bass sound of the various speakers output

from the subwoofer that has a frequency below the frequency set

here is output.

Set this according to the low frequency reproduction capabilities of the

speakers you are using.

Advanced

Specify crossover frequency for each speaker.

• Please set all THX Certiﬁed speakers, set the “Speaker Conﬁguration”

for all speakers to “Small”. We recommend using with the crossover

frequency set to “FIXED–THX–”, but depending on the speaker,

setting it to a different frequency may improve frequency response

near the crossover frequency.

• The “Crossover Frequency” can be set when there are speakers

that have been set to “Small” at GUI menu “Speaker Conﬁguration”

or when “Subwoofer” is set to “Yes” (vpage 23).

• At the “Advanced” settings, if the “Subwoofer Setup” (vpage 24)

setting is set to “LFE–THX–”, GUI menu speakers for which “Speaker

Conﬁguration” is set to “Small” can be set. If set to “LFE+Main”,

the setting can be made regardless of the speaker size.

• For speakers set to “Small”, sound below the crossover frequency

is cut from the sound output. The cut bass sound is output from the

subwoofer or front speakers.

h THX Audio Setup

Set the speaker to play the optimal THX surround mode.

THX Ultra2 Subwoofer

Set when using a subwoofer compatible with THX Ultra2 standards or

a subwoofer that can be properly played at low range.

[Selectable items]

Yes

Make these settings when “Yes” is selected for the subwoofer in the

“Speaker Conﬁguration” settings. This option is not available when

“No” is selected (vpage 23).

BGC (Boundary Gain Compensation)

If bass sound feels big compensate by lowering volume.

[Selectable items]

OFF

• If the bass sound seems too strong:

Set “BGC” to “ON”. This activates a ﬁlter that gently reduces very

deep bass below 55 Hz to provide the ﬂattest overall deep bass

response. Select “ON” or “OFF” according to how strong you prefer

the deep bass response to be.

• This can be set when the “THX Ultra2 Subwoofer” setting is set to

“Yes”.

SB Speaker Position

Set the distance between the left and right surround back speakers.

[Selectable items]

Under 1ft

1ft – 4ft

Over 4ft

• When two surround back speakers have been set in “Speaker

Conﬁguration” (vpage 23), set the distance of the speakers. This

option is not available when “1spkr” is selected.

• This setting is necessary to achieve the optimum effect in the THX

Surround EX, THX Ultra2 Cinema, THX Music mode and THX Games

mode.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 86 87

Comments to this Manuals

No comments

Denon AVP-A1HD Owner's Manual Page 26

Comments to this Manuals

Related products and manuals for Audio amplifiers Denon AVP-A1HD