Denon AVR-1906 User Manual download pdf (Page 49)

ENGLISH

2 Parameters

Large:

Select this when using speakers that have sufficient ability to

reproduce bass sound below the frequency set for the

crossover frequency mode.

Yes / No:

Select “Yes” when a subwoofer is installed, “No” when a

subwoofer is not installed.

Small:

Select this when using speakers that do not have sufficient

ability to reproduce bass sound below the frequency set for the

crossover frequency mode. When this is set, bass sound with

a frequency below the frequency set for the crossover

frequency mode is sent to the subwoofer.

None:

Select this when no speakers are installed.

2sp / 1sp:

Set the number of speakers to be used for the surround back

channel.

Advanced Setup – Part 2Advanced Setup – Part 2

If the subwoofer has sufficient low frequency playback

capacity, good sound can be achieved even when “Small” is

set for the front, center and surround speakers.

Setting the Delay Time

Input the distance between the listening position and each

speaker to set the delay time for the surround playback.

Preparations:

Measure the distances between the listening position and the

speakers.

Center FRFL

Subwoofer

Listening position

SL SR

SBL SBR

Press the CURSOR

button to select the

speaker to be set.

Press the CURSOR

button to set the

distance between the speaker and the listening

position.

The distance changes in units of 1 foot each time the button

is pressed. Select the value closest to the measured

distance.

If “Yes” is selected for “Default”, the settings are

automatically reset to the default values.

The difference in distance for the various speaker

settings must not be greater than 20 ft.

Press the ENTER button to enter the setting.

• The “Speaker Setup” menu appears.

Press the CURSOR

button to select

“Delay Time” at the “Speaker Setup” menu,

then press the ENTER button.

• The “Delay Time” screen appears.

• Use this setting to balance the playback levels in different

channels and make them appear equal.

•From the listening position, listen to the test tones produced

from the speakers to adjust the level.

• The levels can also be adjusted directly from the remote control

unit ( page 47).

Setting the Channel Level

Press the CURSOR

button to select

“Channel Level” at the “Speaker Setup” menu,

then press the ENTER button.

• The “Channel Level” screen appears.

Press the CURSOR

button to select

“Auto” or “Manual”.

Auto:

Adjust the level while listening to the test tones produced

automatically from each speaker.

Manual:

Select the speaker from which you want to produce the test

tone to adjust the level.

Press the CURSOR

button to select

“TEST TONE Start”, then press the CURSOR

button to select “Start”.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 66 67

Comments to this Manuals

No comments

Denon AVR-1906 User Manual Page 49

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1906