Denon AVR-2803S Operations Instructions Page 17
- Page / 76
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
17
System setup Default settings
Auto Tuner
Presets
FM stations are received automatically and stored in the memory.
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
!2
!3
Setup Lock
Set whether or not to lock the system setup settings so that they
cannot be changed.
Setup Lock = OFF
NOTES:
• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example,
if the TV monitor is connected to both the AVR-2803/983’s S-Video and video monitor output jacks and signals are input to the AVR-2803/983
from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to
the S-Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a cord to the S-VIDEO
MONITOR OUT jack. (For details, see page 30.)
• The AVR-2803/983’s on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small
characters on TVs with small screens or low resolutions.
• The setup menu is not displayed when headphones are being used.
• Speaker system layout
Basic system layout
• The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor:
Subwoofer
Center speaker system
Surround speaker systems
Surround back speaker systems
Front speaker systems
Set these at the sides of the TV or screen with
their front surfaces as flush with the front of the
screen as possible.
Before setting up the system
1
2
Check that all the connections are correct, then turn on the main unit’s power.
Display the System Setup Menu.
• Before setting up, connect the AVR-2803/983’s MONITOR OUT connector with the monitor TV and turn off the power of all playback devices
connected to the AVR-2803/983’s video input connectors. (For instructions on connecting the monitor TV, see page 7 and 8.)
To stop system setup before it is completed, press the system setup button again.
System setup can be stopped at any time.
The changed settings are stored and the on-screen display turns off.
• If you make a mistake at a system setup setting, you can reset it by selecting the desired menu from the System Setup Menu screen. The
settings that have been changed up to that point are stored.
- AVR-2803/983 1
- CAUTION: 2
- ATTENTION 2
- WARNING: 2
- SAFETY INSTRUCTIONS 3
- TABLE OF CONTENTS 4
- BEFORE USING 4
- CAUTIONS ON INSTALLATION 4
- CAUTIONS ON HANDLING 5
- FEATURES 5
- CONNECTIONS 6
- Connecting the ZONE 2 jacks 11
- Speaker system connections 12
- Protector circuit 13
- Note on speaker impedance 13
- PART NAMES AND FUNCTIONS 14
- Front Panel 14
- Remote control unit 15
- SETTING UP THE SYSTEM 16
- Before setting up the system 17
- Setting the type of speakers 18
- Setting the Delay Time 20
- Setting the Channel Level 21
- FL C FR SR SBR SBL SL SW 22
- Setting the ZONE2 Control 25
- Setting the Trigger Out Setup 28
- Auto Tuner Presets 28
- Protecting the setting 29
- After completing system setup 30
- REMOTE CONTROL UNIT 31
- Inserting the batteries 31
- Preset memory 33
- 6,7 : Manual search 35
- 2 : Stop 35
- 3 : Pause 35
- Learning function 36
- System call 37
- Punch Through 38
- Resetting 39
- OPERATION 41
- FUNCTION 42
- ANALOGDIGITAL 43
- (Remote control unit) 44
- After starting playback 45
- (Main unit) 45
- RECOUT SOURCE 46
- ZONE2 SOURCE 47
- SURROUND 49
- Dolby Surround Pro Logic 50
- MODE cinema 51
- DTS NEO:6 mode 52
- OFFSET - 4dB 54
- DSP SURROUND SIMULATION 55
- DSP surround simulation 56
- Tone control setting 58
- Surround parameters e 59
- Surround modes and parameters 60
- LISTENING TO THE RADIO 61
- Checking the preset stations 62
- LAST FUNCTION MEMORY 63
- TROUBLESHOOTING 64
- ADDITIONAL INFORMATION 65
- Surround back speakers 66
- Speaker setting examples 67
- Surround 68
- DTS Digital Surround 69
- DTS-ES Extended Surround 70
- DTS 96/24 71
- Surround Mode 74
- Input signals 74
- SPECIFICATIONS 75
- Printed in Japan 511 4012 002 76
- Telephone: (03) 3837-5321 76
Related products and manuals for AV receivers Denon AVR-2803S
AV receivers Denon AVR-X1100W Owner's Manual
(259 pages)
(259 pages)
(48 pages)
AV receivers Denon AVR-1312 User Manual
(66 pages)
(66 pages)
© 2020, manymanuals.com. All rights reserved. | 0.700 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals