Denon AVR-2803S Operations Instructions download pdf (Page 36)

Learning function

If your AV component is not a Denon product or if it cannot be operated using the preset memory, it can be controlled with the accessorious

remote control unit by storing its remote control signals in the remote control unit.

For some remote control signals it is not possible to “learn” the signals or the device will not operate properly. In such cases use the remote

control unit included with the device to operate it.

1, 3, 7

Press the USE/LEARN button with the tip of a pen etc., to set

the learn mode.

• Both the mode selector buttons and LEARNED/TX indicator

flash.

Press the mode button of the equipment for which learning is

desired.

• Mode button and LEARNED/TX indicator flash.

Press the button that is to be learned.

The LEARNED/TX indicator stops flashing and the mode

button lights.

• Mode button and LEARNED/TX indicator flashed if a button

that cannot be “learned” is pressed.

• To cancel, press the USE/LEARN button.

Point the remote control units directly at each other and press

and hold in the button on the other remote control unit which

you want to “learn”.

The mode button and the LEARNED/TX indicator lights,

release the button on the other remote control unit.

• The mode button and the LEARNED/TX indicator start

flashing again.

To “learn” other buttons, repeat steps 2 to 5.

Other remote

control unit

Once the learning operation is completed, press the

USE/LEARN button again.

The mode button and the LEARNED/TX indicator stop flashing

and the learning mode is cancelled.

Flashes

Check that the stored codes

work properly.

NOTES:

• If the codes could not be stored, the LEARNED/TX indicator

start flashing rapidly. For limited number of models, codes

cannot be stored in RC-924.

• If the mode button and LEARNED/TX indicator start flashing

rapidly, this means that the memory is already full, and the code

you have just attempted to store was not stored.

To “learn” that code, first perform the resetting operation. (See

page 39.)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 75 76

Comments to this Manuals

No comments

Denon AVR-2803S Operations Instructions Page 36

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-2803S