Denon AVR-X3000 Owner's Manual download pdf (Page 162)

162

Appendix

TipsPlaybackConnections

Contents

Front panel Display Rear panel IndexRemote

Settings

Distances

Set distance from listening position to speakers.

Measure beforehand the distance from the listening position to each

speaker.

2 Unit

Set the unit of distance.

Meters (Default)

Feet

2 Step

Set the minimum variable width of the distance.

0.1m (Default) / 0.01m

1ft / 0.1ft

2 Set Defaults

The “Distances” settings are returned to the default settings.

2 Set the distance

0.00m – 18.00m / 0.0ft – 60.0ft

•The speakers that can be selected dier depending on the “Amp Assign”

(vpage159) and “Speaker Conﬁg.” (vpage160) settings.

•Default settings :

Front L / Front R / F. Height L / F. Height R / F. Wide L / F. Wide R / Center /

Subwoofer : 3.60 m (12.0 ft)

Surround L / Surround R / Surr.Back L / Surr.Back R : 3.00 m (10.0 ft)

•Set the dierence in the distance between the speakers to less than 6.00 m

(20.0 ft).

Levels

Set the volume of the test tone to be the same when it is output from

each speaker.

2 Test Tone Start

Output test tone. A test tone is output from the selected speaker.

While listening to the test tone, adjust the volume output from the

selected speaker.

–12.0dB – +12.0dB (Default : 0.0dB)

•When “Levels” is adjusted, the adjusted values are set for all the sound

modes.

•When headphones are connected to the PHONES connector on this unit, you

cannot set “Levels”.

2 Set Defaults

The “Levels” settings are returned to the default settings.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 231 232

Comments to this Manuals

No comments

Denon AVR-X3000 Owner's Manual Page 162

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-X3000