Denon DN-D6000 User Manual download pdf (Page 8)

ENGLISH

PLAY/PAUSE button (13)

• This button will start or pause playback.

• Push once to start playback, once again to

pause playback, and once more to resume

playback.

CUE button

• Pushing this button in play mode will force the

track back to the position which playback

started. While in search mode, it makes new

Cue point. (Cue)

• In Cue mode, by pushing the CUE button

makes a Stutter sound from the Cue point. This

is called Stutter play. (Stutter)

Scratch Disc

Use this vinyl scratch disc for scan, manual

search, Pitch Bend and Scratch operations.

FLIP/CLR button

• FLIP:

Use this to select operating mode of A1 and A2

buttons, from Hot Start mode and Stutter

mode. The display will indicate “H/S” or “STR”

• A1, A2 CLR:

If the A1 or A2 button is pushed while pushing

the FLIP button, you can clear the selected A

point.

By holding down just the FLIP button for more

than 1 sec, you can clear A1 and A2 points all

at once.

(SAMP) RVS/CLR button

• (SAMP)RVS:

Use this to select the sample play direction

forward and reverse. When select reverse RVS

LED lights up.

• (SAMP) CLR:

If the SAMP button is pushed while pushing

the this button, you can clear the SAMP data.

Or, by holding down just the this button for

more than 1 sec.

(3) RC-D60 Front panel

CAUTION:

• Note that there are many buttons working two

different function selected by short time

pushing or long pushing (1second or more). The

mark indicates short time push function and

mark indicates long time push function.

A1, A2 button

• Using this button you can create starting point

for Hot Start, Seamless Loop and Stutter.

SAMP button

• Push this button to record or play sound of

Sampler.

B button

• Use this to set the B point for to create a

Seamless Loop after the A point has been set.

(SAMP) B button

• Use this to set the Sampler loop B point.

EXIT/RELOOP button

• Use this to exit or return back again to

Seamless loop playback. You can add variety

to looping with this function.

(SAMP)EXIT/RELOOP

• Use this to turn the Sampler Loop mode on

and off. Also acts as EXIT/RELOOP button for

Sampler Loop to exit or back again.

NEXT TR./B TRIM button

• When the button is pressed during playback,

the NEXT TRACK MODE is selected. If the

button is pressed again, the B TRIM MODE is

selected.

In the standby and pause modes, only the B

TRIM MODE can be selected.

(SAMP.) STOP button

• Push this button while in Sampler record or

playback, Sampler record or playback stops.

TITLE button

• CD TEXT:

When there is CD text data, the CD text data

is displayed automatically or when the button

is pressed.

If no TEXT is available, the display will indicate

“No TEXT”.

• MP3:

When an MP3 file has ID-3 tag data, the title,

artist name and album name are selected and

displayed each time the button is pressed.

PART NAMES AND FUNCTIONS

(1) Front panel

POWER button (¢ON £OFF)

• Push this button to turn power on and off.

POWER indicator

• This lights when the power is on.

Disc loading slot

• Load the disc slowly, and release it once the

DN-D6000 starts grabbing the disc in.

Disc slot LED

• This flashes while the disc is ejecting.

• The LED lights when the disc is not loaded and

serves as the disc slot illumination.

DISC EJECT button

• Push this button to eject the disc.

• The disc will not eject during playback.

Stop playback before pushing this button.

Analog output jacks

(LINE OUT)

• This is unbalanced RCA output jacks.

• Audio signals outputs.

Fader start jack

• Use this when your mixer has Fader Start

function with 3.5 mm stereo mini cord.

Digital output jack

• Digital data is available from this jack.

• Use 75 Ω/ohms pin cord for connection.

• We recommend you use braided wire type

shielded cable.

NOTE: The playback level after analog

conversion is set to -12dB bellow the

usual level to avoid digital distortion.

Remote connector (REMOTE)

• Connect this connector to the RC-D60 using

the included cord.

(2) Rear panel

CAUTION:

• Do not turn off the power while a disc is

loading or being ejected. Otherwise loading

mechanism may be damaged.

CAUTIONS:

• Do not load discs when the power is turned

off.

• Do not try to forcibly remove a disc once

the DN-D6000 has started to grab the disc.

• Do not load more than once disc at a time

or insert anything other than discs.

Otherwise loading mechanism may be

damaged.

NOTE:

Please clean the dirt of the label side of a disc

and start loading of the disc.

The dirt causes a slip of a disc loader roller.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comments to this Manuals

No comments

Denon DN-D6000 User Manual Page 8

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-D6000