Denon DN-D6000 User Manual download pdf (Page 9)

ENGLISH

ECHO/LOOP

• The ECHO and LOOP functions can be

selected. The feedback time and feedback

number can be selected. Looping for the

feedback time (ECHO LOOP) is possible by

setting the feedback number to “MAX”.

TRACK/PARAMETERS knob

• TRACK:

When PARAMETERS LED is on, turn this knob

to select tracks.

By pushing this knob down while turning, the

tracks will change by 10 tracks at a time.

• PARAMETERS:

When the PARAMETER LED is flashing, turn

this knob to select and change the parameter

for items found in the Platter effects, Memo,

and Preset data, etc.

• FILE SEARCH MODE:MP3 DISC only.

When pushing this knob for more than 1

second, the file search selection mode is

selected.

FAST SEARCH (6),

Quick Jump button

FAST SEARCH (7)

Quick Jump button

• Quick Jump:

When one of these buttons is tapped shortly,

the playback position jumps approximately 10

seconds in the reverse (

6) or forward (7)

direction. The jump time can be changed in the

preset mode.

• FAST SEARCH:

When one of these buttons is pressed and

held in, the disc is fast-searched in the reverse

(

6) or forward (7) direction.

PITCH BEND – button

PITCH BEND + button

• Pushing these buttons will change main

playing speed temporarily.

• While pushing PITCH BEND + button the

playing speed increases and speed decreases

while pushing PITCH BEND – button.

• When release button, playing speed returns to

the previous speed.

DISC MODE button

Select from Scratch playback, Bend mode or

Manual Frame Search mode.

• SCRATCH:

This button lights up or blinks in orange or

green when scratching. Manipulate the sound

by pushing down on the disc.

• BEND/SEARCH:

When the Disc mode is set to BEND during

playback, it alternates as the pitch bend

function. The display will indicate “Bend”.

When Disc mode is set to Search, during

Pause or CUE mode, it alternates as the

Manual Search and Fast search function. It

works as the Manual search when the disk is

turned. It works as the Scan when the disk is

pushed. The display will indicate “Search”.

FILTER

• One of three filters (LOW PASS, MID PASS

and HIGH PASS) can be selected.

FLANGER

• The feedback time and feedback gain can be

selected.

TAP, LOCK, AUTO/INPUT BPM

button

• TAP:

When you push this button repeatedly, the

Auto mode turns off and starts measuring your

Beats Per Minute (BPM) by tapping.

• LOCK:

When this button is pressed once while the

auto BPM counter is operating, the data

measured by the auto BPM counter is locked.

• AUTO:

When pushing the TAP button for 1 second,

activates AUTO BPM mode.

The measured BPM is displayed in the

character section of the display.

• INPUT BPM :

When the TAP button is pressed and held in

for more than 2 seconds, the BPM input mode

is set and the BPM value can be input directly

with the PARAMETERS knob. When the tap

button is pressed again, the BPM input mode

is turned off.

NOTE:

If you select a new track, AUTO BPM mode turns

on automatically.

TIME,/ CONT./SINGLE button

• TIME:

A short push will displays mode changes

between ELAPSED TIME and REMAIN TIME.

• 4-way TOTAL TIME display mode can be

selected by

⁄5 PRESET ”(13) Time Mode”.

• At this time, you can select display mode from

four modes, TRACK ELAPSED, TRACK

REMAIN, DISC ELAPSED and DISC REMAIN.

• CONT./SINGLE:

Long pushing play ending mode between

CONT (continue: play more tracks) and

SINGLE (stop playing and ReCUE’s back to

your set point).

• SINGLE PLAY LOCK:

When SINGLE PLAY LOCK is selected, track

selection during playback is disabled. This

prevents playback from stopping when the

Track Select Knob is turned accidentally during

playback.Play ending mode is the same as

single mode.

MEMO, PRESET button

• MEMO:

The memo mode starts when this button is

pushed once in the Cue mode.

• PRESET:

When this button is pushed for more than 1

sec, the PRESET mode menu is displayed.

The machine status must be in, CUE, PAUSE

or No Disc mode before entering the preset

mode.

(SAMP) PITCH/VOL. button

• When the button is pressed, the SAMPLER

PITCH is selected. When pressed again, the

SAMPLER LEVEL is selected.

Pitch of Sampler and output level of Sampler

playback can be adjusted with the

PARAMETERS knob.

REMOTE connector

• Connect this connector to the REMOTE

connector on the DN-D6000 using the included

cord.

(4) RC-D60 Rear panel

Pitch Slider

• Use this slider to adjust playing speed.

• The playing speed decreases when slid

upwards and increases downwards.

PITCH/KEY, RANGE button

• With this button you can select PITCH and KEY

ADJUST mode. Mode changes Pitch on, Key

Adjust on and both off cyclically. PITCH LED

indicates in Pitch mode and KEY ADJUST

indicator in the display lights up in Key Adjust

mode.

• RANGE:

Push this button for more than 1 sec to select

the pitch range. The pitch range can be

selected with the PARAMETERS knob from

±4, 10, 16, 24, 50 or 100%.

RVS button, DRAG–S button

• Push this button to set the RVS mode.

• Push this button for more than 1sec to set the

DRAG-S.

BRAKE button

• Push this button to set the BRAKE.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments

Denon DN-D6000 User Manual Page 9

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-D6000