Denon DN-MC6000 Owner's Manual download pdf (Page 24)

Basic operation

Press POWER.

The unit is powered ON, and DECK CHG. and the track selection

knob light up.

Select the input source for each channel using

channel input source switch knob.

For LINE1 and LINE2 input terminals, you can switch between

“PHONO” and “LINE”. For information about setting up these

terminals, see “Connecting external devices and MIC” in page

Use LEVEL to adjust the input level.

The input level is displayed in the CUE master level meter.

Use HI/MID/LOW to adjust the audio quality.

Use the channel fader and cross fader to adjust the

volume.

Use MASTER LEVEL to adjust the output level.

n Adjust the cross fader curve

Adjusts the startup response of the cross fader.

Beforehand, use the cross fader assignment switch on the front panel

to set each channel to the cross fader A and B.

Turn X FADER CONTOUR to adjust the curve response of

the cross fader.

: Slow startup curve characteristics (nine steps).

: Sharp startup characteristics, with cut-in/cut-out.

Basic operation

MIC (Mic input)

Press MIC ON 1 to use MIC1 and MIC ON 2 to use

MIC2.

When you press the button, it lights up and the MIC input is

switched ON.

Use MIC1 LEVEL or MIC2 LEVEL to adjust the MIC

input level.

Use MIC1 HI/MID/LOW or MIC2 HI/MID/LOW to

adjust the MIC audio quality.

n Echoing the MIC input

q Press ECHO ON 1 to echo MIC1 and ECHO ON 2 to echo MIC2.

• When you press the button, it lights up and the echo is

switched ON.

w Press ECHO ON 1 to echo MIC1 and ECHO ON 2 to echo MIC2.

n Enabling the ducking function

The ducking function detects the MIC input and attenuates the audio

signal level of the master output. This prevents MIC audio from being

inaudible under loud music.

Press DUCKING.

• DUCKING lights up.

n Outputting MIC audio to external devices

You can output MIC audio together with the master audio from the

booth/send and REC output terminals.

Press POST.

• POST lights up.



















   











































   











































 



POWER

MIC1 HI/MID/LOW

PHONES

ECHO

PHONES

LEVEL

PAN

SPLIT CUE

CUE

クロスフェーダー

アサインスイッチ

クロスフェーダー

チャンネルフェーダー

MIC2 HI/MID/LOW X FADER CONTOUR

LEVEL

POST

MIC1 LEVEL

MIC2 LEVEL

MIC ON 1/2

DUCKING

ECHO ON 1/2

HI/MID/LOW

DECK CHG.

チャンネル

入力ソース

切り替えつまみ

MASTER LEVEL

USBオーディオ出力切り替えスイッチ

ミキシングモード切り替えスイッチ

DECK CHG.

トラック選択ノブ

This section describes operations of the unit without using the DJ software.

• For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.

• For information about the buttons on the unit for operating the DJ software and their functions, see the following pages.

• TRACTOR······Page 3, 4

• Virtual DJ······Page 5, 6

Channel fader

Cross fader

Track selection

knob

Cross fader

assignment switch

Mixing mode selector switch

USB audio output source selector switch

Channel input

source switch

knob

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 33 34

Comments to this Manuals

No comments

Denon DN-MC6000 Owner's Manual Page 24

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-MC6000