Denon DN-S3500 User Manual download pdf (Page 13)

ENGLISH

Power on play

• When “POWER ON PLAY” is set to “ON” at “⁄5

PRESET (10)”, playback starts from the first track on

the disc when the power is turned on.

Relay playback

• Relay Play function is a useful mode to continue

playback between two DN-S3500s.

•Connect the MEMO IN/OUT terminals between two

DN-S3500s.

Start Relay Play

q Push the RELAY

button for more than

1 sec to enable

Relay play mode.

You can set Relay

play mode as below.

• In the single play mode, when the one

player’s playback reaches end of track,

another DN-S3500 starts playing.

• In the continuous play mode, when all

tracks on one player are finished, another

DN-S3500 starts.

• The discs in two DN-S3500s can be

played alternately by setting both DN-

S3500 to the relay play mode.

/SINGLE

RELAY

CONT.

Stop Relay Play

w When the RELAY

button is pushed for

more than 1 sec

while in the relay

play mode, the relay

play mode is turned

off.

/SINGLE

RELAY

CONT.

ARAMETER

REL

OOP

EXIT

FILE

EAR

BTRIM

CON

q, w

Move the #3 Pitch Slider to adjust

the pitch. The current pitch setting

is displayed on the display.

Pitch decreases

Pitch increases

DN-S3500 has six pitch ranges, 4%, 10%,

16%, 24%, 50% and 100%.

When the #4 RANGE button

is pushed for more than 1 sec,

the pitch range can be selected

with the @7 PARAMETERS knob.

•When the @7 PARAMETERS knob is pushed

the pitch range is entered and the pitch range

selection mode is cancelled.

NOTE:

Only a max of 16% range for MP3 discs.

•With PITCH BEND function you can change pitch

temporary. DN-S3500 has two ways for this function

PITCH BEND buttons and Scratch Disc.

Pitch Bend

PITCH

RANGE

TRACK SEARCH

PARAMETERS

PUSH ON/OFF

PITCH BEND +/– buttons

• Push the #1 PITCH BEND – or #2 + button for

momentary change of pitch.

While holding these

buttons down, the pitch

continues to change up

to the limitation.

• After releasing the

PITCH BEND buttons,

playback pitch returns to slider setting.

Scratch Disc

•

When the Platter source is

set to BEND, the playback

speed can be changed by

turning !0 Scratch Disc during

playback. The display will

indicate “Pitch Bend” during this mode.

• The pitch increases gradually when the

Scratch Disc is turned clockwise and

decreases when turned counterclockwise.

• When you stop turning the Scratch Disc, the

playing speed returns to the previous pitch.

PITCH BEND

When the Platter source is set

to MAIN and the Platter is

turning, playback of the Main

source can be slowed

temporarily by lightly pressing

!0 Scratch Disc or PLATTER.

In addition, playback can be quickened

temporarily by pushing Scratch Disc or

PLATTER in the direction in which the Platter is

turning.

Push the #4 PITCH button to

PITCH LED lights up.

PITCH

RANGE

•With the Pitch slider you can adjust the playback

speed (Pitch).

• If you would not prefer to change key of sound, use

the Key Adjust function.

Adjusting the pitch and Key Adjust

4-1

KEY ADJUST ON

When the #5 KEY ADJUST button is pushed,

the Key Adjust function is turned on and lights

up “KEY ADJ.” in the display.

4-2

KEY ADJUST OFF

When the #5 KEY ADJUST button is pushed

again, the Key Adjust function is turned off.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comments to this Manuals

No comments

Denon DN-S3500 User Manual Page 13

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-S3500